6.5 builds ...let's see them

I feel bad...i have one in works but have no pictures...stock has got 6 months before the stork delivers.
Trigger is enroute
Barrel is enroute to gunsmith
 
engineer40 said:
This is my 6.5-284. Started life as a $199 Remington 783 in 30-06. Goal with this rifle was just to learn and experiment on the cheap.
-Criterion bull barrel. 1:8 twist.
-PTG bottom metal and AI mag.
-Bedded action myself.
-Was my first time installing a barrel and setting headspace.

I don't really care for the looks of the muzzle brake but there aren't a lot of options for a muzzle diameter that girthy. This rifle is fun to shoot. It doesn't recoil or muzzle jump at all when fired. I purchased the stencils and Cerakote to do the whole thing in digital camo, but life threw me a curve ball a couple years ago and I have a dozen unfinished rifle projects.

Not as fancy as all of the rest posted here. But I do have less invested into this than many factory stock rifles, it was fun to put together myself, it's fun to shoot, and for some reason it gets a ton of attention when people see it. I always get questions... Quite the conversation starter. :)
View attachment 126893 View attachment 126894 View attachment 126895
Click to expand...
 
E4891F14-7B7A-4400-9D05-B8A11F3C0144.jpeg
Is it wrong to post a non-custom but slightly customized rifle? I haven't gone down the custom route but if I did I think it would be with the Lone Peak Razor TI, Christensen Arms carbon wrapped barrel with titanium side port brake (support the locals) in a Manners EH1 midnight camo stock.

Another one of my babies:
Christensen Arms Ridgeline 6.5 PRC in a Mesa Precision Arms Altitude CF/camo CA titanium side port brake clocked without the crush washer.
Talley one piece mounts.
Vortex Razor HD AMG.
Total weight 7lbs unloaded.
 
Last edited:
rbirch222 said:
Is it wrong to post a non-custom but slightly customized rifle? I haven't gone down the custom route but if I did I think it would be with the Lone Peak Razor TI, Christensen Arms 7mm carbon wrapped barrel with titanium side port brake (support the locals) in a Manners EH1 midnight camo stock.

One of my babies:
Christensen Arms Ridgeline 7mm.
Mesa Precision Arms Altitude stock custom painted in olive w/black webbing. CA titanium side port brake clocked without the crush washer.
Talley one piece mounts.
Vortex Razor HD AMG.
Total weight 7lbs 8 oz unloaded. It's a 1/2 moa shooter. Banging rocks out to 1100 yds a couple weekends ago. Fun stuff. View attachment 127029
Click to expand...

20190317_170558.jpg
 
aushunter1 said:
Actually its the other wat around!
ADI AR2213SC is your H4831SC
Its actually made here in Australia by Thales & sent to the USA & rebadged as Hodgdon 4831sc.
Click to expand...
I knew very well it's made over younder! HURRY UP and get someone to ship H50BMG (AR2218) over here!!
 
Last edited:
tbrice23 said:
I knew very well it made over younder! HURRY UP and get someone to ship H50BMG (AR2218) over here!!
Click to expand...
I'm really surprised someone hasn't picked it up for import yet since hodgdon quit. I recently located 15# in a gun shop, just need to go get it.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Similar threads

C.O. Shooter
338 builds (lapua/edge/or the like) lets see them.
12 13 14
Replies
195
Views
52K
hseII
hseII
L
Painted stocks. Lets see them
2 3
Replies
29
Views
10K
Carolinadx
C
O
Pictures of big heavy longrange rifles -let's see them.
11 12 13
Replies
175
Views
75K
adam32
adam32
T
Let’s see you 30cal builds
4 5 6
Replies
75
Views
21K
TXAoudadKlr
T
S
Let's see your edge's
2 3
Replies
32
Views
12K
Frank in the Laurels
Frank in the Laurels

Recent Posts

Top