I know this is a new cartridge than seems to be gaining steam with the hornaday marketing machine. But I will not have one made unless someone decent picks up the brass for it. Hopefully lapua, ADG, or Peterson will do it.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Who’s going to make 7mm PRC brass?
- Thread starter Dmagna
- Start date
Help Support Long Range Hunting Forum
Montucky Roamer
Well-Known Member
I'd imagine those you mentioned will. I will now forget about the cartridge till I see plenty of brass by ADG around.
They will at some point but it may be a while. They can't keep up with current demand in their offerings as it is.
The brass issue is where I am having issues in a couple other rifles. Especially my 6 arc.
I bet it will be at least a year, it took that or longer for the 6.5 and 300. looks like factory ammo for brass and don't expect brass only till mid 23. look at the ARC still nothing can't even find grendal brass because everybody is converting it to ARC.
with the economy the way it is things might take a lot longer before the other major brass companies come on board. if you want it just use Hornady it aint that bad they came a long way in the last few years.
with the economy the way it is things might take a lot longer before the other major brass companies come on board. if you want it just use Hornady it aint that bad they came a long way in the last few years.
Montucky Roamer
Well-Known Member
Has anyone else looked at the saami specs. I bet they will have the same stupid clicker issue as the 6.5 and 300! How dumb!
Tighter fitting brass doesn't an accurate round make! Probably go thru all the same threads of "clicker issues with 7prc". I can see it now.
Tighter fitting brass doesn't an accurate round make! Probably go thru all the same threads of "clicker issues with 7prc". I can see it now.
6 ARC is easy... Just convert the 6.5 grendel
It's very easy... I still reload my factory hornady brass for a gas gun but I only use the lapua grendel brass I converted for my bolt
A lot of people are having the same issues with converting brass. I am getting a belt on both star line and Lapua 6.5 grendel brass. 20" proof barrel with adjustable gas block and jp bolt.
