Traditional Weight 7mm Hammer

[RockyMtnMT]

Here is the new Hammer HHT that we just finished up in the traditional 120gr class of 7mm bullets. This is going to be a great option in any of the 7mm's for lower recoil and laser beam flat trajectory for any of your big game hunting needs.

.284 Cal-118gr Hammer HHT™ - Hammer Bullets

AT THIS TIME TIPS ARE CONSUMER INSTALLED TIPPING BLOCK INCLUDED WITH EACH ORDER This pure copper Hammer HHT™ comes in at a traditional weight for the 7mm cartridges at 118gr. Requiring a minimum twist rate of 1-11" this bullet will be fully stabilized in most all factory rifles and offer great...

hammerbullets.com

 

[Justice1327]

Been waiting for this. My 7mm Creedmoor will appreciate it!

 

[SamuelBerryhill308]

Been waiting for this. My 7mm Creedmoor will appreciate it!

Tell me more about this cartridge?

 

[SamuelBerryhill308]

Here is the new Hammer HHT that we just finished up in the traditional 120gr class of 7mm bullets. This is going to be a great option in any of the 7mm's for lower recoil and laser beam flat trajectory for any of your big game hunting needs.

.284 Cal-118gr Hammer HHT™ - Hammer Bullets

AT THIS TIME TIPS ARE CONSUMER INSTALLED TIPPING BLOCK INCLUDED WITH EACH ORDER This pure copper Hammer HHT™ comes in at a traditional weight for the 7mm cartridges at 118gr. Requiring a minimum twist rate of 1-11" this bullet will be fully stabilized in most all factory rifles and offer great...

hammerbullets.com

can't wait to try some of these in my wife and sons 7mm-08 I'm sure it will work out great as all of y'all's bullets do

 

[john k]

Here is the new Hammer HHT that we just finished up in the traditional 120gr class of 7mm bullets. This is going to be a great option in any of the 7mm's for lower recoil and laser beam flat trajectory for any of your big game hunting needs.

.284 Cal-118gr Hammer HHT™ - Hammer Bullets

AT THIS TIME TIPS ARE CONSUMER INSTALLED TIPPING BLOCK INCLUDED WITH EACH ORDER This pure copper Hammer HHT™ comes in at a traditional weight for the 7mm cartridges at 118gr. Requiring a minimum twist rate of 1-11" this bullet will be fully stabilized in most all factory rifles and offer great...

hammerbullets.com

Other than the tip, is there any performance differences compared to the 120gr HH? Thanks

 

[RockyMtnMT]

Other than the tip, is there any performance differences compared to the 120gr HH? Thanks

We are seeing a consistently larger would channel at low to mid velocity impacts. Basically it is staying the same between 2000 fps and 2800 fps impact. High velocity we can't tell a diff. Same opening and shedding of the nose petals that is expected from Hammers. Same 60%-70% weight retention as Hammer Hunters, depending on the proportion of nose for individual bullets for how much weight retention they will have.

 

[john k]

Thanks Steve!

 

[adk hunter]

Do these have tips installed yet or still need to be installed by the buyer?
Maybe there is a youtube of this already...??

 

[RockyMtnMT]

Do these have tips installed yet or still need to be installed by the buyer?
Maybe there is a youtube of this already...??

We should have a machine for installing tips next spring, hopefully. So until then they are consumer installed. Not hard to do. @Zen Archery has a video that he can post.

 

[Justice1327]

Tell me more about this cartridge?

I used to mandrel up a 6.5 Creedmoor in 3 separate steps. But I just got my SAC Creedmoor sizing die and can now do it in just one step. Last night I loaded some 100gr Bullets. Mostly to fireform the brass, use up some old powder they don't make any more, and get the barrel sped up.

My previous 7 mm Creedmoor barrel I shot up to 162 grain bullets at the same velocity as I've shot my traditional 708. When I tried the 162 it fits in the case better compared to the 708 and fits better in mags. . I just got my carbon fiber barrel back from Short Action Customs and will load 120-140gr. Essentially this replaced my 708, but I did have a 708 Ackley built with a long throat that I put in an XM plus action . I can really get the 162 ELD's out from the case body and gives me 175 ft./s more than the traditional 708.

 

[newmexkid]

Do these have tips installed yet or still need to be installed by the buyer?
Maybe there is a youtube of this already...??

I recently installed some on 95 gr. HH bullets. It was easy peasy and I am the original 10-thumbs guy! Don't forget to use a plastic-tipped hammer for the installation. Don't ask how I found that out! LOL. They shot so well out of my 257 WBY that I'm currently waiting for another box to be delivered.

 

[Window]

Here is the new Hammer HHT that we just finished up in the traditional 120gr class of 7mm bullets. This is going to be a great option in any of the 7mm's for lower recoil and laser beam flat trajectory for any of your big game hunting needs.

.284 Cal-118gr Hammer HHT™ - Hammer Bullets

AT THIS TIME TIPS ARE CONSUMER INSTALLED TIPPING BLOCK INCLUDED WITH EACH ORDER This pure copper Hammer HHT™ comes in at a traditional weight for the 7mm cartridges at 118gr. Requiring a minimum twist rate of 1-11" this bullet will be fully stabilized in most all factory rifles and offer great...

hammerbullets.com

I know that this isn't exactly the same but it's close…. The 117 HH's out of a 270 Weatherby Mag is ridiculous on elk and deer out to 600 yds. Keep up the good Hammer boys!