Timney Trigger Issues

[Eric H]

Just installed Timney HIT for my Remington 700 Tactical and finding that the trigger is touching the bottom of the trigger guard when tightening the stock. Is there an aftermarket guard with front and rear holes that will remedy this? Currently using spacer until remedy found.

 

[pointy sticks]

I just had this happen with a trigger tech. I ground down the trigger slightly and polished it up with some emery cloth. Can't tell it was messed with. I didn't have to take much material off to get it to clear.

 

[quigley257]

Not uncommon for Timneys. The easy answer is to just grind down the trigger shoe. I have had to do this on many of them. Just touch it up with some cold blue and you are good to go.