DoneNOut
Well-Known Member
I've got the Savage Benchrest stock on the target action and would like to have a stock with LOP and cheek riser. Who would make a good one for this action? (I know it has some bolt spacing to consider)
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Stock for Savage Model 12 Target Dual Port
- Thread starter DoneNOut
- Start date
Help Support Long Range Hunting Forum
Savagehunter1968
Well-Known Member
- Joined
- Nov 2, 2016
- Messages
- 182
Grs
DoneNOut
Well-Known Member
I'm wanting a target stock. Single feed 30" barrel.
Carey Farmer
Well-Known Member
PST136 – Savage Model 10 FCP / 12 LRP Short Action Rifle Stock
Fits: Savage model 10 FCP / 12 LRP right hand short action detachable magazine with large tactical barrel contour. (Designed for the newer feeding system with 4.40" spacing between the front and rear action screws.)
shop.hsprecision.com
Alternatively, and a lot cheaper than a new stock:
Adjustable Kydex Cheek Rest ELR 2.25" - Matthew's Fabrication
Extreme Long Range ELR Adjustable Kydex Cheek rest - Matthew's Fabrication Cheek Riser Cheek Rest for Greater Accuracy on Long Distance Shots
matthewsfabrication.com
Tagging in.
Stocks - Stockade Gun Stocks
Stockade Gun Stocks specializes in varmint, hunting, long range bench rest, tactical, AR-15, and bench rest rifles. Rifles may be built on custom actions, Remington, Savage or other various actions.
www.stockadegunstocks.com
DoneNOut
Well-Known Member
Thanks! Looking for something designed without magazine cutout.
PST136 – Savage Model 10 FCP / 12 LRP Short Action Rifle Stock
Fits: Savage model 10 FCP / 12 LRP right hand short action detachable magazine with large tactical barrel contour. (Designed for the newer feeding system with 4.40" spacing between the front and rear action screws.)
Alternatively, and a lot cheaper than a new stock:
Adjustable Kydex Cheek Rest ELR 2.25" - Matthew's Fabrication
Extreme Long Range ELR Adjustable Kydex Cheek rest - Matthew's Fabrication Cheek Riser Cheek Rest for Greater Accuracy on Long Distance Shots
Last edited:
Carey Farmer
Well-Known Member
I'm not 100% sure the HS Precision stock will work for a target action. They work for the model 12 LRP. That model has only two action screws plus another screw for the trigger guard.
I would check with Boyds Stocks. I believe they make the wood stocks for factory Savage target actions.
MDT!!!
quigley257
Well-Known Member
I have a Savage 12T dual port that I run in an H-S Precision PSV121 stock. It accepts the target receivers with the three action screws(versus two in most Savage receivers) and accommodates the dual ports perfectly. It is not an adjustable stock, but as mentioned prior, you could certainly add an adjustable aftermarket cheek piece if you wanted to.
shop.hsprecision.com
PSV121 – Savage Short Action Single Shot Rifle Stock
Fits: Savage right hand, short action single shot dual port action with heavy varmint barrel contour. This stock is designed for the short action 3 screw dual port single shot action. Please check your hole spacing prior to ordering.
shop.hsprecision.com
I came across this old thread looking for something else and didn't know if you found a stock. Earlier this year I got the McMillan XIT with the adjustable LOP and cheek riser for a Savage single-shot target action. I've been busy with other side projects and life in general and haven't actually put it to use yet but it looks great. I will have to file down part of the inlet to allow the bolt release to go down far enough to remove the bolt. The channel for the bolt handle also needs a little opening up so that the bolt will go down that last 1/16" or so. I'll also need to sand out the barrel channel slightly so it'll float. They didn't have my exact contour in their system when I ordered it so I got as close as I could and figured I'd do the rest. It's 5lb 5.5oz (without the trigger guard).
