Carey Farmer

Another vote for 28 Nosler. Brass is widely available .. and Graf's usually keeps Peterson 28 Nosler brass in stock. Same case...

I really like my 28 Noslers. 180s at 3200fps out of my 27" Bartlein barrel. I have another one I'll likely use all copper bullets in...

Here is how I think about case stretching upon firing. I'm not sure I'm right about any of this, but this is what I think happens...

Haha me too. Chemical plant?

I am now at the point of stopping my pursuit of edge of pressure loading. Ejector marks are very common when pushing for velocity on my...

With the cost and availability of brass as it is today, I started to back off on some of my hunting loads a couple of grains from my...

I sure everyone else has chimed in already but sticky bolt lift for me had always happened after I had ejector swipes. So to me sticky...

The truth here is, that different brands of brass become elastic at different pressure, which is what causes sticky bolt lift. Sticky...

High pressure Sour gas plant, here. My last job, near 18 years, the wellhead pressure was 22K psi + with 15 or/so % H2S. High enough to...

There is a common propensity for handloaders to push too hard. It has become common for owners of .257 Weatherby's to boast their...

I do use double based powders but I will work up loads in the summer so temps during season will be lower. The other way around is a...

Varget H4350,H4831,H1000, H4895. I use IMR 4064 in my 220 Swift.

Yes sometimes folks forget the square inch thing. We had a several ton reactor head that was being removed and popped off killing a guy...

I've been told that a time or two. :)

Yep. Retumbo, H1000, and N165 are about all I shoot.