Show off your rig thread

6.5x284
Stiller Predator
McM HTG
Rock Creek, ABS carbon wrapped, Sendero Contour, 29"
Jewell Trigger
Zeiss 6-24x56

Smithed by Rock Creek Barrels

DSCF1003.jpg


BarnesGroup.jpg


BarnesGroup2.jpg


IMG00060-20111025-1956.jpg



Rock River Arms ATH Carbine
Nikon 3-12x42

DSCF0011.jpg


10 Shots at 100, **** thing will out shoot my high dollar bolt gun. (55 grain Sierra Blitzking over Benchmark powder)
10shots.jpg
 
--300WSM--
Remi action, glass & pillar bedded
Brux #9 Heavy Target Barrel 1/10 twist
Slabbed 3 port Muscle break
Rifle Basix trigger-2lbs
B & C Light Tactical Stock
Desert Warrior Cheek Rest
DNZ Freedom Reaper One piece Mount
Leupold Mark 4, 6.5-20x50mm TMR
BUILT BY-- Scott Edwards @ RSE Custom Guns in 29 Palms CA
 

Attachments

  • Dec 2011 022.jpg
    Dec 2011 022.jpg
    56.2 KB · Views: 59
  • 300WSM 002.jpg
    300WSM 002.jpg
    86.4 KB · Views: 100
.338 RUM
Rem 700 BDL LA/LH
Badger Bolt Knob
Shilen Select Match SS Barrel
Holland Recoil Lug
Timney Trigger
Badger 20moa Pic Rail 8-40 Screws
McRee's Precision Chassis AI 5rnd Mag
Harris Bipod is gone, wears an Atlas V8 now.

She's wearing XTR rings & a 8.5-25 MK4 W/TMR in the pic, but she's wearing American Rifle Company 34mm rings &
the 6.5-20 MK4 M5-Auto Locking Turret Leupy now -Mil/Mil.

300smk @ 2780
 

Attachments

  • 338 RUM (6).jpg
    338 RUM (6).jpg
    194.9 KB · Views: 98
My new rig.
Lawton ss 8000 action
Lawton 30 inch 310 ss barrel
Chambered in 375 Cheytac
Cheytac break
40 moa base
Jewell trigger set at 1.5 lbs
Joel Russo a-5L stock in purple heart
3 way lop. w/thumb wheel cheek piece
Bruce Baer bottom metal
Grafite black cera-coat
5.5-22x56 Nightforce scope
 

Attachments

  • tuller6[1].jpg
    tuller6[1].jpg
    32.3 KB · Views: 89
This years group of rifles. Sorry my picture skills are not on par with a lot of the guys here. Waiting on a .338 edge that will most likely be my go to once I get some loads working in it but for now...

My long range rig SS sendaro in 300RUM
shooting the 208 A maxs
vortex 6.5-20x50 mill dot ret have to paint it since it just went on at Christmas replacing the Loup Mark4 M3 I had on it
full trued and blueprinted rem 700 action
bushing firing pin
barrel set back trued threads and re chambered
Vias break
kydex adj cheek riser
pillar bedded and devcon action
ground badger recoil lug
rifle basix trigger at 2.5#
so94br.jpg

My more tactical bean field rifle :)
Kimber 8400 advance tactical fully trued action
Nikon tactical 3-10 milldot
cdi dbm
badger rings
19" tube and custom crown
pillar bedded and marine tex
McMillan A5 with adj cheek
adj trigger
15qxn38.jpg

nf16qr.jpg

My scouting rfle, super light 7.25#s and shoots 3/4moa to about 500
Remington model 7
DNZ aluminum one piece rings and base
Burris short mag light weight 3.5-9 scope with graduated hold overs
Stocky's exotic custom stock pillar bedded and marine tex
custom trigger 2#
18" now but going to cut it to 16" and creakoat the whole thing mat black

b80mqt.jpg
 
Rem 700 Sendero SFII
300 RUM
Vais brake
Meopta Meostar R1 4-16x44 mil dot
Talley rings
Kampfeld knob and fluted bolt
 

Attachments

  • 300.2.jpg
    300.2.jpg
    124.7 KB · Views: 96
  • 300.1.jpg
    300.1.jpg
    216.2 KB · Views: 98
Thought I would throw mine in there too. The only custom guns are the two Thompson Centenders. The 17 HMR has a Bullberry barrel and the .223 has an MGM barrel on it. The others are stock shooters.

308web.jpg


243web.jpg


223web.jpg


17hmrweb.jpg


Jim
 
my tack drivers. top is a coyote lite 270wsm topped with a burris 4.4-14 fullfield II. The other is a classic sporter 300wby topped with a simmons pro 50. both guns proven to 700yds but I am convinced that with better optics and more trigger time, I am sure I can hit 1k with both
 

Attachments

  • my tack drivers.jpg
    my tack drivers.jpg
    6 KB · Views: 65
Here are some of mine. The next one I build will be an all carbon fiber tubegun. in 338 lapua possibly a TI action.
338 edge
IMG_2148.jpg

savage action
IMG_6154.jpg

IMG_5572.jpg

243
243.jpg
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top