Setting the Rem 700 trigger pull....

[Drury]

Just aquired a "new to me" Rem 700 and the trigger pull is still set at the heavy factory setting. I remember that you can drop the trigger set out of the stock and one of the two screws sets the pull. But for the life of me, I can't remember which one. I want to lighten the poundage a little. Can someone jog my memory? Thanks

 

[1doug]

try the search, about six months ago there was a very good in depth post replied by fifty driver i belive.

 

[Drury]

Thanks. Found the post and how it addressed the sear angle. Very good info. However, I didn't find any info on which of the 2 screws sets the amount of pull. If anyone can enlighten me on which screw sets the trigger pull, I would be most grateful.

 

[redbone]

YOU CAN FIND IT ON THIS WEB ADDRESS www.logicsouth.com ""NOTE"" DO KNOT TOUCH THE BACK SCREW BEHIND THE TRIGGER .

 

[Sasquatch]

try this link, and be carefull.

http://www.quarterbore.com/library/articles/rem700trigger.html

 

[4ked Horn]

Here it is.