Just rebarreled my 700 with Sendero contour. Got MaGpul stock. My scopes run out of Elevation adjustments! I cannot lower crossbars enough to coincide with Bore Sighter! Any advice? Thanks in advance, S.
Scope adjustments?
- Thread starter Shubey
- Start date
longrangebo
Well-Known Member
- Joined
- Oct 8, 2005
- Messages
- 302
- Reaction score
- 95
z rings!
Are you referring to Burris Z Rings,or?
Damage Inc.
Well-Known Member
Did you have that issue prior to re-barreling?
longrangebo
Well-Known Member
- Joined
- Oct 8, 2005
- Messages
- 302
- Reaction score
- 95
Yes , you get shims that can change to + or - 40 degrees nice set up!
yobuck
Well-Known Member
- Joined
- Aug 23, 2008
- Messages
- 2,823
- Reaction score
- 2,528
- City & State/Province
- east central fl. /n.c. pa.
I didnt know they made those for Unertle scopes Bo. lol
DoneNOut
Well-Known Member
Shim both Rings?
NO Sir, not at all!
DoneNOut
Well-Known Member
The rings allow you to use the Burris inserts to cant the scope so you can open up available elevation. You would put a "0" in front and + 10, 20, 40 in back. I like to set my elevation adjustment prior to placing into the inserts. I can open up 90% of the elevation travel this way.
longrangebo
Well-Known Member
- Joined
- Oct 8, 2005
- Messages
- 302
- Reaction score
- 95
I switched to Night force years agoHaHaHa
huntsman22
Well-Known Member
Did you loosen your zero stops before trying to boresight?.........
Not sure what you mean? Please explain.
