I received a Defiance AntiX LA Rigby Well Cut Action. The question is I know I can use Defiance's Rigby BDL Kit.......If I order a Manner's EH1 Stock that is CIP cut can I use a M5 bottom metal? The CIP manners stock I found has the chasis and M5 bottom metal already. This is for a 300 Norma Build.
Spec sheet of the action:
anTi X Action (Right Bolt, RIGHT PORT, LONG, .747 bolt, 0.750 Rec., Rigby Mag Well, PLUNGER EJECTOR, Defiance Wyatt, REMINGTON "RECESSED" BOLT NOSE, .595(338 LAPUA BOLT FACE), Integral 20 MOA, 750 Jense AL 1/2-24, anTi knob long, .071 fluted long, Right Anti-Bind, None)
#800: 2
#728: 0
#729: 0
#731: 0
#735: 16
Primary Extraction: Defiance
Loading Port Type: Deviant GA Hunter Port
Rear Bridge: Deviant GA Hunter
Facet: Deviant GA Hunter
Bedding Type: Bolt In
Safety: Remington Style Safety
Manufacturer: Defiance - Laser (L)
Tang Hole: THROUGH TANG HOLE
Tang: Standard TANG
Bolt Flutes: anTi RH Flutes
Rear Scope Spacing: NONE
Center Guard for Single Shot: NONE
Port Length: DEFIANCE PORT LENGTH
Bolt Handle: 5 Rotation, 7 Sweep, .350" Diameter
Spec sheet of the action:
anTi X Action (Right Bolt, RIGHT PORT, LONG, .747 bolt, 0.750 Rec., Rigby Mag Well, PLUNGER EJECTOR, Defiance Wyatt, REMINGTON "RECESSED" BOLT NOSE, .595(338 LAPUA BOLT FACE), Integral 20 MOA, 750 Jense AL 1/2-24, anTi knob long, .071 fluted long, Right Anti-Bind, None)
#800: 2
#728: 0
#729: 0
#731: 0
#735: 16
Primary Extraction: Defiance
Loading Port Type: Deviant GA Hunter Port
Rear Bridge: Deviant GA Hunter
Facet: Deviant GA Hunter
Bedding Type: Bolt In
Safety: Remington Style Safety
Manufacturer: Defiance - Laser (L)
Tang Hole: THROUGH TANG HOLE
Tang: Standard TANG
Bolt Flutes: anTi RH Flutes
Rear Scope Spacing: NONE
Center Guard for Single Shot: NONE
Port Length: DEFIANCE PORT LENGTH
Bolt Handle: 5 Rotation, 7 Sweep, .350" Diameter
