-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Need load info on RL26 and H1000 for a new 300 wsm build
- Thread starter Brianc74
- Start date
Help Support Long Range Hunting Forum
4xforfun
Well-Known Member
I have never tried it, but from what I hear , it is simmiler to RL 25..just more temp stable.
DON'T take my word for it , though, because it is just a guess on my part. A call to the MFR on Monday should answer your ???
Good luck,
Tod
DON'T take my word for it , though, because it is just a guess on my part. A call to the MFR on Monday should answer your ???
Good luck,
Tod
In regards to your question regarding load info for the .300 WSM and RL 26..........I am shooting the 210 grain Berger VLD and sent the fine folks over at Berger a request for load data for that combo. Granted, it is not the 215 grain bullet you were asking about, but maybe you have some 210's you could substitute. This is the information I received back.
Attachments
I found good results with IMR 7828ssc behind the 215 Berger in the 300 WSM.
Norma brass with CCI BR-2 primers. My middle and most accurate node is with 64.2 grains of 7828ssc with MV of 2757 fps at 85 degrees sea level through a 26" tube. These are loaded long with a COAL of 3.295"
Norma brass with CCI BR-2 primers. My middle and most accurate node is with 64.2 grains of 7828ssc with MV of 2757 fps at 85 degrees sea level through a 26" tube. These are loaded long with a COAL of 3.295"
