Need 6.5x284 load for Barnes 130gr TSX

[huskerhunter]

Hi guys,

I'm pretty handy with Google and other search but I've not found what I need...

Have a box of .264 130gr TSX's on the way for my 6.5x284 but I can't find load data.

Powders I have on hand:

N560
H1000
H4831SC
Hybrid V 100
IMR4831
IMR4350


Thanks in advance for any help!

 

[Ccctennis]

I have used 4831sc and hybrid 100 v with my 6.5. I shoot 100 grain and 140 grain pills. Not 130. Mag pro powder gave me my best results. Plus it meters better than 4831

 

[huskerhunter]

I have used 4831sc and hybrid 100 v with my 6.5. I shoot 100 grain and 140 grain pills. Not 130. Mag pro powder gave me my best results. Plus it meters better than 4831

Thanks but what I really need is specific load data for the bullet in question with one of the powders listed....Anyone?

Thanks!

 

[Deleted member 46119]

What COAL are you going to use?

Barrel length? bolt face to muzzle.

Many of your powders are fine.

Look here: 6.5-284 Norma @ www.reloadersnest.com

 

[HuntFarther]

I can tell you that jfseaman cannot give you a honest opinon. He is only trying to become a internet nija and get his post count up. Use caution when listening to him.

 

[Deleted member 46119]

I can tell you that jfseaman cannot give you a honest opinon. He is only trying to become a internet nija and get his post count up. Use caution when listening to him.

Before getting carried away with your revenge quest you should read the forum Rules & FAQ

 

[huskerhunter]

24" BBl and COAL with a 142gr SMK is 3.07" Plenty of room to seat em' long if needed.

 

[Deleted member 46119]

24" BBl and COAL with a 142gr SMK is 3.07" Plenty of room to seat em' long if needed.

This is what QL tells me.
Powder, charge, % fill, notes

N560 53.2 @ %94.2, %90 fill is 50.84 The closest book is the Lapua 144 FMJ at 43.2 to 48.5
H1000 54.7 @ %100 Book data is from 49 to 55, %90 fill is 50.84
H4831SC 51.8 @ %92.8 Book data is from 45 to 50.3. Use caution.%90 fill is 50.3
Hybrid V 100 48.3 @ %90 but pressure is high as a starting point. Book data is 45 to 49.5
IMR4831 48 @ %90.7 Book data is 41 to 56.2 Use caution.
IMR4350 47.6 @ %90 but pressure is high as a starting point. Book data is 42 to 46


Optimal Barrel Time theory says your accuracy node will be at ~2770fps. A long brass life pressure of ~52k psi

The next higher node is at ~2880 fps at a predicted ~60k psi, a brass killng pressure.

 

[huskerhunter]

Thank you very much! With what you see, which powder would you use?

 

[Deleted member 46119]

IMR 7828 SSC, oops not on your list.

N560 is what QL says but I've never used it.
​

 

[Stu76x]

The Rifle Section @ www.reloadersnest.com
There is a lot of useful information on this site, however some loads seem very hot. Looks like you should get 3100fps with 130 gr loads.