My 338 Lapua Magnum by Cloud Peak Gunworks

Discussion in 'Gun Photos' started by C.O. Shooter, Mar 21, 2017.

  1. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    My 338 Lapua Magnum by Cloud Peak Gunworks

    Action: Defiance Deviant Hunter – Long Action:
    - 416R SS (1.403 Thread Depth, 16 TPI)
    - Integral 20 MOA Base
    - Integral Recoil Lug
    - 1.35” OD Receiver Bottom
    - .750 Bolt: One Piece
    - .595 Bolt Face
    - Recessed Lugs
    - Faceted Bolt Shroud
    - Modified Bolt Handle
    - Long Tactical Bolt Knob
    - SS Bolt Stop
    - Deep Fluted Bolt
    - Heavy Tang
    - Mini 16 Extractor
    - Defiance Firing Pin Assembly
    - Wyatt Mag Well Cut
    - (Black Cerakote)

    Bottom Metal & Magazine:
    - PTG Remington 700 Long Action (LA) Tactical Bottom Metal (BDL) Steel: (Black Cerakote)
    - Wyatts MBE-3 Magazine Box (3.825) Long Box
    - Wyatts Long Action Follower
    - Wyatts Follower Spring

    Barrel: Bartlein 416R Stainless – .338 Caliber
    - Lapua Tactical Match Reamer – .371 Neck/.148 Freebore
    - 30” Finished Length - Heavy Palma Contour (“B Measurement – 1.25” for 4”) Finished @ .90
    - 1-9” Twist, 5R Rifling
    - 5 Port Muscle Brake, Muzzle Brake (Round)
    - (Black Cerakote)

    Trigger: Jewel HVRTRS – No Bolt Release (1.5 Lbs.)

    Optics: Nightforce (C555) ATACR: 5-25x56MM Enhanced/MOAR-T Reticle HS/ZS
    - Badger Ordnance Rings 1.0/M40A3/34 MM (Steel: 306-75)
    - Holland Shooting Supply – 34 MM Scope level

    Stock: HS-Precision PST036
    – Gray w/Black Webbing (Fully Bedded)

    Weight: 15 lbs.

    Length: 52 3/8”

    Supplies:
    - Bullets: Berger 300 Grain Elite Hunter (.417 G7 BC)
    - Brass: 338 Lapua
    - Powder: H1000
    - Primers: Federal 215 Match
    - Dies: Redding Type S FL Die (36594)

    The rifle was built by Trevor Rosencranse of Cloud Peak Gunworks (CPG). Trevor is great to work with. He answered any and all questions. Completion and delivery of the rifle was as stated. If someone is looking for a quality gunsmith for a custom rifle build, don’t hesitate to contact him. The fit and finish of this rifle is amazing.

    Cloud Peak Gunworks
    Trevor Rosencranse
    P.O. Box 757
    610 South 8th Street
    Basin WY 82410
    1-307-568-3009
    Cloud Peak Gunworks Home Page
     

    Attached Files:

    Last edited: Mar 21, 2017
    300whisper likes this.
  2. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    Components:

    Nightforce Enhanced ATACR (C555) - ATACR

    Badger Ordnance Rings M40A3 (306-75) - https://www.badgerordnance.com/34-mm-scope-ring-usmc-m40a3-1-0.html

    Defiance Deviant Hunter (20 MOA) - Deviant Hunter | Defiance Machine

    Bartlein Heavy Palma, .90@Muzzle, 1-9 twist, 5R, 30" - Bartlein Barrels, Inc. | Just another WordPress site

    5 Port Muscle Brake - Products - Brakes - Piercision Rifles

    HS Precision (PST036) - https://www.hsprecision.com/shop2/r...-large-tactical-barrel-stock-pst036/?___SID=U

    PTG Tactical Bottom Metal - Remington 700 (LA) Action Tactical Bottom Metal (BDL) - Pacific Tool and Gauge

    Jewell Trigger (HVRTS) - Jewell HVRTS No Bolt Release - Piercision Rifles

    Wyatt's Mag Well, Spring, and Follower - WYATT'S OUTDOOR, INC.
     

    Attached Files:

    Last edited: Mar 21, 2017
    300whisper likes this.
  3. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    Love it!
     

    Attached Files:

  4. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    The Nightforce ATACR is a tank!
     

    Attached Files:

    Last edited: Mar 21, 2017
  5. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    The 5 Port Muscle Brake.
     

    Attached Files:

  6. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    Scope Clearance.
     

    Attached Files:

  7. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    Almost Twins! Both CPG Rifles!
    6.5x284 in the Back
    338 Lapua in the Front
     

    Attached Files:

  8. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011

    Attached Files:

    Last edited: Mar 21, 2017
  9. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    As a side note. I ordered the same stock as my first build to include color and model. Ordered directly from HS Precision. Check out the difference in color. Both ordered as Gray with Black Webbing.
     

    Attached Files:

  10. Idsharp

    Idsharp Member

    Messages:
    13
    Joined:
    Nov 11, 2016
    It's been great to see your project come about. I like your stock and scope choices. I'm currently waiting for my 338LM so this has given me some needed distraction. You have an awesome rifle and scope. I'm interested to see how your load development goes. The best to you.
     
  11. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    Thank You! Load development will be starting soon as time permits! I'll continue to post my progress.
     
  12. Timber338

    Timber338 Well-Known Member

    Messages:
    1,616
    Joined:
    May 10, 2011
    Such a cool build. Awesome how you have taken the time to post up every last detail, links to the components, as well as your experience with CPG.

    very interested to see how it shoots!
     
  13. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    I got the opportunity to shot this rifle for the first time tonight. Although I only shot three rounds, Freaking Awesome!

    For my Break-In and load development, I will be shooting:
    300 Grain Berger Elite Hunters
    H1000
    215M Primers
    Lapua Brass
    @150 Yards

    I received the rifle with 10 rounds fired, shoot clean, shoot clean method. Everyone has their own method of barrel break in and this is mine. I will be shooting 3 rounds a night followed by a cleaning. I'll do this for 15 rounds (5 sets of 3). Then do 6 rounds (1 Fouler + 5 Shot Group) strings working up in powder chargers!

    Started at 88 grains @ Magazine Length (3.825).
     

    Attached Files:

  14. C.O. Shooter

    C.O. Shooter Well-Known Member

    Messages:
    1,805
    Joined:
    Jul 20, 2011
    88.5 grains @ Magazine Length (3.825).
     

    Attached Files: