Eaglet.
Thanks for the tip.
I agree with your theorys completely.
When I saved sight in conditions I entered zero in the alt box. ( I will need to change that )
[QUOTE]Yes, you need to enter the on location elevation or altitude.[/QUOTE]
I have unchecked the the top box in the sight in conds page. ( I think that is what I need to do )
[QUOTE]If it is unchecked it will save your sight in conditions and when you move to different conditions and you enter them, these new set of conditions will not replace the saved sight in conditons. The program will be giving you accurate information for your new location.[/QUOTE]
Now that I know I need the alt figure I will enter the raw stn pressure figure I had that day as the refence and enter in the alt box the number the kestrel gives me for alt.
To get the correct alt figure on the kestrel it asks for a refence figure BP- alt, alt - BP I think.
[QUOTE]I have two weather stations and none is a Kestrel. You'll have to make sure you're using it right. Time to read the instructions my friend.[/QUOTE]
I still am confused a little. DO you mean that I get the raw stn BP, then go to the alt function and re enter the raw stn pressure figure as the refence ? This will then give me a alt figure based off the raw stn pressure ? Correct ?
[QUOTE]You got me here, are you talking about Kestrel? You have to configure Ketrel in a way that when to enter the BP screen it will give you the On Location reading. I think you accomplish that by making sure the in the BP screen the internal Altitude is set to 0 (zero) and by moving to a Known altitude, in the altitude screen you set that known altitude. This process of re-entering known altitude in the altitude screen of kestrel is done frecuently depending on how frecuent the weather conditons are changing.[/QUOTE]
Many thanks
DUH