Gunwerks 7 LRM???

[dflyfish]

I just copied what skip posted. 71 of H1000, 215m primer and .002 neck tension. Zero signs of pressure. Could probably get over 3k with no effort.

 

[Cmrem700]

Thanks for the info

 

[Ram161]

Finally loaded up the adg 7lrm brass and did a test at 100 yards.
Always had a flyer with the old brass and that did not show up in this test.
Old load was 69.5 of H1000 at 2950.
New brass was 70 grains at 2988.
Fed 215m primers.
Berger 180 hybrid
Brass was weight sorted and most of the 100 brass came in at 255 grains +- .5

 

[shawnb]

What you guys getting for loaded neck diameter with the new brass?

 

[wasskeet]

Any 7 LRM updates out there?

 

[bgbuck153]

My LRM was accurate with the junk Hornady brass but WOW is it accurate with the new ADG brass. I ran the 175 EOL's this year. I didn't kill anything with them but super accurate. This was a 400 yard group on a 2" dot. I shot the 3 shots and thru my spotter I couldn't see holes in the surrounding paper. So I drove down and about crapped my pants.I will undoubtably put another 7LRM barrel on if this one gets shot out. I already have a second barrel ready in the event that happens. Lol

 

[highdrum]

I plan to build one again myself. Just need to get a reamer.......and brass once GW has some once fired available.

 

[bgbuck153]

I talked to Gunwerks recently and they don't rent or have resents anymore. What they do now is you send in your barrel and they use a 2 piece reamer and do 1 at a time. I assume you could have PPG make you one or Manson. Gunwerks has some new stuff coming out this year that I'm excited about.

 

[wolffman]

Care to say what new stuff is ? Will be talking to them at DSC in January.