Gunsmith Recommendation

[17remhunter]

I have a Remington 700 Action that I think has been Blue Printed, at least I was told it had by the last Smith. It has a M-14 extractor and a Jewell Trigger its a short action and the last barrel was for the 6.5 CM It was fitted to a Mc Millan Stock that is pillar bedded. Im looking for a Smith that will make sure the action is blue printed and will rebarrel it with a 24" #4 1x 7.5 barrel that he would recommend for the 6mm Creedmoor.....................any recommendations and phone #s would be appreciated.

 

[tobnpr]

I'm assuming you meant M16 extractor, nbd...
"Blueprinting" or truing an action has no firm definition. If the receiver threads were single-pointed that could be determined once the barrel is pulled and the tenon measured. It's a straightforward rebarrel, maybe some stock work (barrel channel?). Easy-peasy. Feel free to PM me if you like, in FL but if you're gonna ship it's all the same.

 

[ShtrRdy]

I typically recommend these two primarily for good turn around time and good work quality

Long Rifles Inc

Gunsmithing Services

www.longriflesinc.com

Mile High Shooting Accessories

Gunsmithing - Mile High Shooting Accessories

Mile High Shooting Accessories Gunsmithing. MHSA houses a full machine shop dedicated to producing and servicing precision rifles; bolt action & gas operated.

www.milehighshooting.com