Gunsmith Recommendation

17remhunter

Well-Known Member
Joined
Aug 5, 2021
Messages
108
Location
Nevada
I have a Remington 700 Action that I think has been Blue Printed, at least I was told it had by the last Smith. It has a M-14 extractor and a Jewell Trigger its a short action and the last barrel was for the 6.5 CM It was fitted to a Mc Millan Stock that is pillar bedded. Im looking for a Smith that will make sure the action is blue printed and will rebarrel it with a 24" #4 1x 7.5 barrel that he would recommend for the 6mm Creedmoor.....................any recommendations and phone #s would be appreciated.
 

tobnpr

Well-Known Member
Joined
May 30, 2013
Messages
346
I'm assuming you meant M16 extractor, nbd...
"Blueprinting" or truing an action has no firm definition. If the receiver threads were single-pointed that could be determined once the barrel is pulled and the tenon measured. It's a straightforward rebarrel, maybe some stock work (barrel channel?). Easy-peasy. Feel free to PM me if you like, in FL but if you're gonna ship it's all the same.
 

ShtrRdy

Well-Known Member
Joined
Jan 14, 2012
Messages
3,791
Location
High Plains
I typically recommend these two primarily for good turn around time and good work quality

Long Rifles Inc

Mile High Shooting Accessories
 
Top