Dry firing and snap caps

EXPRESS

Well-Known Member
Joined
Jun 25, 2003
Messages
447
Location
Aussie in Italy
When I store rifles, I pull the trigger with the bolt up, then, holding the trigger down, slowly lower it.

This eases the firing pin own slowly thus taking the load off the spring.

Snap caps are probably fine but I only own them for a fine 12ga.
 
Warning! This thread is more than 20 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top