Deciding My Next Rifle’s Chambering

[Jud96]

Here's the print for the reamer I'll be using on this build!

 

[slikmrc]

So with your tweaks on the reamer, are you having a sizing die reamer cut also? Or are you thinking off the shelf dies will work.

 

[Jud96]

So with your tweaks on the reamer, are you having a sizing die reamer cut also? Or are you thinking off the shelf dies will work.

I didn't modify anything on the body of the case. The only thing changed is the neck diameter and the throat specs.

 

[slikmrc]

Got ya, was thinking the shoulder would be a little longer but looks like it would only be .001 or so longer. That should be well in spec for dies. Should be a sweet piece.

 

[Alex Wheeler]

7mms are best necked up to .30s lol