Burris zee rings

[the big greasy]

Hello everyone. I have a tikka t3 with the dovetail groove cut into the top of the reciever, and I'm wanting a pair of rings with the plastic inserts that you can add moa. I'm wanting to keep the scope as low as possible. Does anyone know which exact ring I can put on that will clamp to my dovetail on my rifle so I don't need to buy a rail, and has the inserts. Thanks.

 

[stinkyduck13]

I have some medium 30 mm rings on a model 70 with weaver bases. They are a bit too tall, bottom of base to bottom of rings is .5 of an inch. If that helps at all?

 

[the big greasy]

I have some medium 30 mm rings on a model 70 with weaver bases. They are a bit too tall, bottom of base to bottom of rings is .5 of an inch. If that helps at all?

Those would be good, I'm just not sure if they would attach to my tikka rail.

 

[AkleyFan]

I believe if you want to run the Burris Zee rings you'll need to put a picatinny rail or Weaver bases on top of your receiver as the Zee rings are setup for Weaver/Pic mounting. That's what I had to do for a hunting buddy about 4 years ago. I'm not aware of any other rings that are like the Zee rings that would directly fit the 16mm (5/8") dovetail on the T3. Some Google-foo may help you find a different solution.