Decided to build a sub 10lb 1000yd rifle ..... again Ended up 9lb 12oz loaded
- Tikka action
- Wilson arms 25" Rem Varmint heavy flutes
- Custom brake
- Metal cerakoted dark titanium
I'll add a custom bolt handle later
- Oem stock I milled, filled with microsphere epoxy and insulation throughout (35oz)
- 3/4 aluminum rear pillar, 7/8" steel front pillar
- rough bed job with devcon steel, then skim job later with marinetex
- machined a stainless recoil lug and bedded
- Burnt red, titanium and black sponge camo with mat clear
- Oem trigger lightened and polished
- PTG 300wsm match reamer headspaced at the go gauge
- Recessed target crown with 45
Indicated thru the headstock and 4 jaw as close to zero as I could see on the mitu DIs.
- Vortex viper hst 6-24
- Talley one piece ring base 30mm
I'll take it out tomorrow and see how she shoots
- Tikka action
- Wilson arms 25" Rem Varmint heavy flutes
- Custom brake
- Metal cerakoted dark titanium
I'll add a custom bolt handle later
- Oem stock I milled, filled with microsphere epoxy and insulation throughout (35oz)
- 3/4 aluminum rear pillar, 7/8" steel front pillar
- rough bed job with devcon steel, then skim job later with marinetex
- machined a stainless recoil lug and bedded
- Burnt red, titanium and black sponge camo with mat clear
- Oem trigger lightened and polished
- PTG 300wsm match reamer headspaced at the go gauge
- Recessed target crown with 45
Indicated thru the headstock and 4 jaw as close to zero as I could see on the mitu DIs.
- Vortex viper hst 6-24
- Talley one piece ring base 30mm
I'll take it out tomorrow and see how she shoots
Last edited: