Bog Shooting Sticks Problem

[Muddyboots]

Bottom extensions will not twist tighten at all. The top extensions work fine. They worked fine last year but now they don't. So anyone run into this before and have a fix? Other than epoxy the extensions to set length with electrical tape. Anyway to get at the bushing that tightens up and locks the extension?

 

[Rogue]

Yup. I just duct taped it. Plan to replace it soon.

 

[Muddyboots]

Afraid of that

 

[ShtrRdy]

Did you call BOG to see what they say?

 

[Muddyboots]

I just "fixed" them. I pulled them out to max, put slight deflection maybe 5-10 degrees while turning at same time. After a few tries, they actually started to grab and tighten up. I set them to the length I wanted, tightened, and them electrical taped them in place. Just didn't want to take chance if them not tightening up again. If this didn't work, yeah, call was in works. I have called them before on their deathgrip and were helpful. So no clue why they wouldn't tighten up. Not sure what I did had anything to do why they started working again either. But all good to go now. I use them primarily for xbow on ground.

Wished these were made with cam locks.