Bergara B-14 Hunter In Rem 700 Stock?

[timberelk]

Does any know if the B-14 hunters will drop into a Rem 700 stock? I would assume it would be a Rem 700 BDL stock?

Does anyone know the weight of the stocks on the B-14 hunters?


I'm looking to try to make the B-14 Hunter a little lighter weight by going with a light bell and Carlson stock but they don't make any specifically for Bergara

 

[timberelk]

Can anyone confirm?

 

[livetohunt]

It's a rem 700 clone, so the action screws should be in the same position as a model 700 action. Their are multiple article reviews about how you can customize the bergara easily because of it being a model 700 clone.

I really hope someone can answer the stock weight question!

 

[timberelk]

Bump

 

[FEENIX]

I don't fault you for your concern, the only Remington reference is ...

"It has been factory drilled and tapped to fit Remington 700 style rings and bases."
(extracted from source: http://www.bergarausa.com/bergara_b-14_series_hunter_rifle.php)

also ~00:43 mark of the video.

Perhaps you can address your concern direectly to them >>> http://www.bergarausa.com/contact.php

Good luck!

 

[Joefrazell]

Im wondering too

 

[cjhunts_alot]

I just swapped the stock on my B14 hunter to a McMillan I bought on a flash sale a few weeks ago. After getting the right bottom metal for the inletting, everything fit together perfectly.

 

[Mitch78]

I recently bought the Bergara B14 hunter in 7RM and I didn't like the stock it came with but I wasn't sure if it would fit into an R700 stock because their website is vague. I sent Bergara an email and they confirmed the action has the same footprint as the Remington. I put it into my friends HS precision stock he had laying around from his scendaro. He had it bedded so I had to sand a little away for the recoil lug which I think is slightly thicker (but I'm not completely sure) on the Bergara but after some sanding it fit perfectly. Action holes lined up and the screws are also the same 1/4x28 pitch. Hope this helps