S stazmania Well-Known Member Joined Dec 17, 2022 Messages 233 Location arizona May 11, 2023 #1 Has anyone had success running the 7prc in a standard bdl hinged floor plate magazine in a rem 700 clone action?
Has anyone had success running the 7prc in a standard bdl hinged floor plate magazine in a rem 700 clone action?
Elk Hunter 338 Official LRH Sponsor Joined Feb 19, 2010 Messages 3,967 Location Boss man @Lane Precision Rifles in Idaho May 11, 2023 #2 it will need a 300 prc width box
S stazmania Well-Known Member Joined Dec 17, 2022 Messages 233 Location arizona May 11, 2023 #3 How about has anyone done any factory prc cartridge in a defiance action with a standard rem 700 style mag and floor plate?
How about has anyone done any factory prc cartridge in a defiance action with a standard rem 700 style mag and floor plate?
FURMAN Well-Known Member Joined Aug 29, 2010 Messages 3,326 Location Kansas May 11, 2023 #4 Any BDL bottom metal will work. The action needs to have feed lips wide enough for a magnum and the mag box needs to be a magnum box. This cartridge is nothing special compared to other long action magnum cartridges.
Any BDL bottom metal will work. The action needs to have feed lips wide enough for a magnum and the mag box needs to be a magnum box. This cartridge is nothing special compared to other long action magnum cartridges.
S stazmania Well-Known Member Joined Dec 17, 2022 Messages 233 Location arizona May 12, 2023 #5 Thanks for the help. I talked with Jim Borden, he was very helpful and says it is not an issue.
