-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
7mm PRC vs 7LRM
- Thread starter sbruni
- Start date
Help Support Long Range Hunting Forum
Montucky Roamer
Well-Known Member
Cool. Yeah. It's shorter and in the mellow magnum class.
There's the 7rum ,28 Nosler, 7stw, and endless wildcats if you want a fire breather. Seems to be in a good place.
There's the 7rum ,28 Nosler, 7stw, and endless wildcats if you want a fire breather. Seems to be in a good place.
sbruni
Well-Known Member
Yeh I get that… I like that happy medium story/spot… that's where I put the LRM… I've seen a handful of suggestions that the PRC would be the LRM's ballistic twin… or slightly shorter at the shoulder with a shorter neck… my guess is real world performance on the PRC will be closer to 7RM than to LRM… of course you've got all the benefits of the PRC if we're talking non-custom and factory loads…
Montucky Roamer
Well-Known Member
Yeah...all the adds and such I've seen for it compare it directly to the 7Rem mag. That's basically what it is , just built the right way (for what we use them for now)from the start.
sbruni
Well-Known Member
So here's a more complete line up… left to right… 28 NOS, 7mm Dakota, 7LRM, 7PRC , 6.5 PRC
Justice1327
Well-Known Member
I have a 7 SAUM so a see no need to change.
If I did, I'd really love the 7 LRM but don't want to deal with the Hornady dies and brass. Although I'm told you can form brass from 300 PRC. I was hoping the 7PRC was going to be a rebranding of the LRM myself.
If I did, I'd really love the 7 LRM but don't want to deal with the Hornady dies and brass. Although I'm told you can form brass from 300 PRC. I was hoping the 7PRC was going to be a rebranding of the LRM myself.
Rhett Crider
Well-Known Member
Was studying SAAMI freebore against Berger bullets and this is what I come up with.
I think that the 7PRC is what every 7mm enthusiast has desired since the 7mmRemMag came out with a belted casing. Now, reloaders can set the headspace entirely off the shoulder of the casing and not worry about a belt to set headspace.
I can't wait to get back a rifle that I gave to my gunsmith to rebarrel to the 7PRC. Now, I am trying to locate some brass.
I too was hoping that the 7LRM was going to be at least the basis of the 7PRC. In my opinion they missed the mark by a good bit with the 7 PRC and until good brass is available I have no interest at all. That said, when you can get good brass it's going to be a great option in a standard long action.
Agreed. My saum with a 21 inch barrel is pushing a 180 hybrid at 2840. Not enough gain with the 7 prc imo, now a hair over a 7rm is a real sweet spot.
Having said that, it will sell like hot cakes especially to thier target audience...those who like accuracy and long range capability without land loading.
Having said that, it will sell like hot cakes especially to thier target audience...those who like accuracy and long range capability without land loading.
