SOLD/EXPIRED 7 SAUM ADG brass. 4 boxes same lot. WTT

[Runnin N Gunnin]

I have four boxes of ADG 7 SAUM brass, same lot. I'm considering trades at this time. I may end up selling them, but I will be considering trades first. Interested in a lightweight 6mm Creedmoor complete rifle, 6mm Creedmoor barreled action or a Defiance anti short or medium action. Trying to build or buy a lightweight 6mm Creedmoor for coyotes, antelope and deer, then let my kids use it for their first hunting rifle. I'm pretty set on a defiance action (anti) and a nice carbon barrel in the 20-24" range. I'll put up money on my end for the right setup. I already have a custom 6mm, but I'm trying to shave some weight on the next one.

 

[mfran615]

Might as well sell the brass. The value of the brass is a fraction of the value of an action or rifle.

 

[GBWS]

I'd take 2 boxes if you end up selling

Thanks

 

[GBWS]

I also have a 6mm bartlein carbon barrel blank if you're interested. Pretty sure it's a 20" it's either a #4 or sendero contour can't remember exactly

 

[Runnin N Gunnin]

BTT

 

[RH300UM]

I'll buy all of it at 100$ per box

 

[softtail103]

How much trade value are you asking?

 

[Runnin N Gunnin]

How much trade value are you asking?

450ish or so. I know it's a bit of a long shot, but I thought I'd throw this trade out there hoping someone has an action, barreled action or built rifle.

 

[JAYgs8163]

I've got a very nice 6 Creedmoor I'd be willing to trade. $2750 cash on your end plus the brass. Scope, rings, and bipod not included.

Mack Bros action with 20 MOA rail with bolt and firing pin bushed.
TriggerTech primary
Krieger 20" 7 twist with fluting by Kampfeld Customs
Throated for 105-115 Bergers
Grayboe stock, they did custom Camo for me.
Grayboe M5 bottom metal with 1 mag.
YHM QD brake for Resonator Supressor.
Cerakoted and all Smith work done by Craigs Custom Rifles in Oro Valley, Az.
Action is fully bedded and also pillars installed.
4" rail for bipod.
QD sling attachments.
81 rounds fired.
Have load development done and some fire formed brass to include also.
Shoots half moa or better if I do my part-see pic 6 below with 5 shot group. 3045 FPS.

 

[6.5saum/300rum]

If you are dead set on a defiance anti look at pucker factor rifles. @PuckerFactorRiflesWY Brian has the best prices and is amazing to deal with. If you want a carbon barrel there's prefits available if you don't want to wait on a smith. What type of stock are you wanting?

 

[Runnin N Gunnin]

If you are dead set on a defiance anti look at pucker factor rifles. @PuckerFactorRiflesWY Brian has the best prices and is amazing to deal with. If you want a carbon barrel there's prefits available if you don't want to wait on a smith. What type of stock are you wanting?

I've got a very nice 6 Creedmoor I'd be willing to trade. $2750 cash on your end plus the brass. Scope, rings, and bipod not included.

Mack Bros action with 20 MOA rail with bolt and firing pin bushed.
TriggerTech primary
Krieger 20" 7 twist with fluting by Kampfeld Customs
Throated for 105-115 Bergers
Grayboe stock, they did custom Camo for me.
Grayboe M5 bottom metal with 1 mag.
YHM QD brake for Resonator Supressor.
Cerakoted and all Smith work done by Craigs Custom Rifles in Oro Valley, Az.
Action is fully bedded and also pillars installed.
4" rail for bipod.
QD sling attachments.
81 rounds fired.
Have load development done and some fire formed brass to include also.
Shoots half moa or better if I do my part-see pic 6 below with 5 shot group. 3045 FPS.



View attachment 475104View attachment 475105View attachment 475106View attachment 475107View attachment 475108

View attachment 475118

What's the weight on that sweet looking rig?

 

[Runnin N Gunnin]

If you are dead set on a defiance anti look at pucker factor rifles. @PuckerFactorRiflesWY Brian has the best prices and is amazing to deal with. If you want a carbon barrel there's prefits available if you don't want to wait on a smith. What type of stock are you wanting?

Funny you should say that, I was just speaking to a friend of mine that's having Pucker Factor build him a 338 RUM and I was thinking about having him put together a rifle for me. I was going to check out how his rifle turns out. Heard nothing but good things about Pucker Factor. I picked up a Mesa Precision altitude to replace an EH1. Shortly after doing that, Manners released the Pro Hunter and I've really been interested in that. So, I'm kind of leaning pro hunter.

 

[JAYgs8163]

With the optic and rings it's just under 10 lbs on my scale. That optic is 27 ounces if I'm not mistaken and then the rings are about 6 ounces.

 

[6.5saum/300rum]

Funny you should say that, I was just speaking to a friend of mine that's having Pucker Factor build him a 338 RUM and I was thinking about having him put together a rifle for me. I was going to check out how his rifle turns out. Heard nothing but good things about Pucker Factor. I picked up a Mesa Precision altitude to replace an EH1. Shortly after doing that, Manners released the Pro Hunter and I've really been interested in that. So, I'm kind of leaning pro hunter.

They have an anti action of mine right now with a stainless barrel getting nitrided and then he's bedding a manners stock for it. I haven't seen any of their work yet but I did buy another action from them and Brian is so helpful and will respond instantly.

The pro hunter stocks seem really nice. I have one but haven't put it on anything yet. I'd consider selling it if you can't find one. It has a mini chassis.