6 PRC

[ManzellaPrecision]

Anyone else running a 6PRC. Care to share load data and results. What brass ?
I'm neck turning Lapua brass and haven't necker it down yet but I've been told to go .269 on bushing size. Chamber neck is .276 Any help or insight is appreciated.

 

[Varmint Hunter]

Check neck diameter of your loaded ammo. Bushing should ne .002-.003" smaller.

IMO you should neck turn AFTER you reduce the neck to 6mm. Turning necks now will result in an unknown neck wall thickness after you neck it down. You final loaded neck diameter should be (about) .003" less than the chamber neck.

 

[ManzellaPrecision]

Already turned them at 6.5 so lesson learned. I took them to .013 a side. Which puts me at .2695-.270 loaded and chamber neck is .276