elkaholic
Well-Known Member
Just recently we had a couple of issues with the seater sleeve hanging up on the 6.5 Sherman dies. After scratching our heads for a bit, it was determined that the problem was that the original 6.5 Sherman had a .293" neck, which is the reamer Whidden uses, and there was not adequate clearance built in for the newer .297" neck. The problem has now been corrected so that ANY of the various neck diameters will function properly in future dies. If anyone out there is having a problem that has not been brought to my attention, just contact me, or better yet, John Whidden, and they will correct the problem free of charge. As usual, Whidden has been very good about resolving any issues that come up. I am sorry for any inconvenience this may have caused......Rich
