308 reloads

just country

Well-Known Member
Joined
Aug 6, 2014
Messages
1,651
Location
78154
morning, I reload my 308 with 130gr. Sierra M HP and 135gr. barnes TTSX bullets
210m Fed. primers, Winchester brass. both loads use WW760 powder.
very accurate loads.
I went to the range last week. changed scopes. resite scope. the 135 barnes
chambered well. shot good. the 130gr. sierra shells will not chamber?
so checked different shells with 130gr sierra's would not chamber.
I neck size only. OOPS. reset the seating depth of the bullets. nothing changed.
pulled the bullets, did not have a FL sizer. so I ordered a hornandy match
sizer. very good die. while lubbing the cases and resized cases. in process
some cases had resistance to the FL process. 3 were removed.
now the only thing I can figure out is that the barnes TTSX bullets have
groves in the bullets for pressure and resistance. the sierra bullets
r match grade bt bullets r sleek and guilded metal. theory the
barnes bullets have less pressure when fired in this chamber than the
sierra bullets???
the rifle is a custom mauser 98 action, cerkoted, timmey trigger,
british machine barrel, BMG. crowned. #6 contour, h&s stock.
shoots .750 and better groups.
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top