300 Varminter Update

Status
Not open for further replies.

wildcat

Well-Known Member
Joined
Jul 16, 2005
Messages
1,651
My rifle should be completed in May 2008. As soon as it's completed, Richard will post pictures of it on His web site. You can visit his site at Richard's Custom Rifles. I know many of you are wanting to hear about it's performance, it wont be too long now. The powder and bullets have been ordered.

I have already started prepping my Norma brass;
1.-cleaning flash holes
2-uniforming the primer pockets
3-turning necks to .334
4-trimming
I know Norma 300 WSM brass is exellent, however, I like to make sure.

The load will consist of the following;
1. Norma 300 WSM Brass
2. 75grns VV-N550 Powder
3. Federal 215M Primers
4. 125grn Nosler Ballistic tip-velocity will be between 4000 to 4050fps
5. &110grn V-Max-velocity will be between 4100 to 4150fps

For those who are new to the site and for those who want to know about my 300 Varminter, here are the specs;

1. 300 Varminter cartridge (300 WSM .337 Tight Neck Match Chamber)
2. Nesika Model K, 1.470 Diameter Action
3. Bartlien 30", 1-15 twist, 1.250 straight cylinder barrel, with zero freebore for 110-V-Max & 125grn BT bullets.
4. Richards Model #8 Stock (Looks like McMillan MBR stock) with lead added too rear.
5. Jewel 2oz trigger
6. Vias Muzzle brake
7. Nesika 20 MOA rail
8. Nightforce 30mm Rings
9. Nightforce NXS 8x32x56mm with MLR reticle
10. Total weight will be 24lbs
11. Custom Rifle Builder-Richard Franklin of Richard's Custom Rifles.
12. Barrel life is around 1500 rounds.

This rifle is being built for 400 to 800 yard Coyote, Squirrel and Pdog hunting. A 300 WSM, without a Custom action, Bartlien 30" 1-15 twist barrel and the use of Norma Brass, will not be able to match the perfromance of the 300 Varminter.

Sorry, to those who hate seeing my many posts on this rifle and topic. However, I wanted to give an update on it's progress and information to those who are interested in the specs and rifle. See you in about two months or less with range results. I will post pics as soon as it arrives, however, like I said, you will be able to see it on Richard's Web site. I will send out a post when I know Richard has posted the pics.

Thanks
W.
 
They just raised the price of ambulance service in DC so everyone needs to be more careful about causing me to choke on my fish sandwich.
 
Sorry, to those who hate seeing my many posts on this rifle and topic. However, I wanted to give an update on it's progress and information to those who are interested in the specs and rifle. See you in about two months or less with range results. I will post pics as soon as it arrives, however, like I said, you will be able to see it on Richard's Web site. I will send out a post when I know Richard has posted the pics.

Thanks
W.



Real informative............No rifle............No chrono results.......... Yea, I was dieing to hear something.....
confused.gif
 
Mr. Harren, could you build me one of these things? course i've only got a Rem action.

Wildcat, are you running .003 clearance with a loaded round or will it be less?
 
Wildcat, thanks for the update. I for one can't wait to hear about how the 300 Varminter performs. I am going to have one built too, so I am very interested in this project.

EddieHarrein, Buffolabob, JWP475 and piuteMike, I really think you guys should get a life and try to respect other's posts. What's the point of poking fun at wildcat's posts. I bet if he was buying an Allen Mag, you guys would never poke fun. I really hope you guys grow up and become respectful.

P44
 
Wildcat, thanks for the update. I for one can't wait to hear about how the 300 Varminter performs. I am going to have one built too, so I am very interested in this project.

EddieHarrein, Buffolabob, JWP475 and piuteMike, I really think you guys should get a life and try to respect other's posts. What's the point of poking fun at wildcat's posts. I bet if he was buying an Allen Mag, you guys would never poke fun. I really hope you guys grow up and become respectful.

P44



You are a new member and probable do not know the back ground to this.... Maybe you may want to do a little research before you start taking sides, but then maybe not....
confused.gif
 
DWilson, the loaded round will measure .334. It will be .003 clearance. The neck diamter in this rifle is .337.

W.
 
JWP475, yes I know the history and wildcat has apologized over and over and over again to the person he offended. I do not think he ment to desrepect the person, he was just trying to defend Richard Franklin because wildcat felt Richard was desrespected. However, like I said, he has apologized on many occassions to the individual who was offeneded. I have even seen post where wildcat praises this gentleman over and over again and recommends him for their future rifle builds, and guys like you continue to hound the guy. Really, get over it and find some better way to spend your time. Everytime wildcat post about his rifle, you guys have to hijack his post with this bull---t.

P44
 
P44, thanks for the comments. Your right about the hijacking of the post, however, I am used to it by now. I just ignore those guys.

W.
 
Wildcat, I remember you posting about this rifle a while back. Pretty exciting time when you're getting this close. Best of luck with it and make sure you post some results when you get it rolling. I just got my latest project, it took about 5 months. It was pretty finicky at first but I finally got it figured out and it is shooting super sweet. Good luck!
 
JWP475, yes I know the history and wildcat has apologized over and over and over again to the person he offended. I do not think he ment to desrepect the person, he was just trying to defend Richard Franklin because wildcat felt Richard was desrespected. However, like I said, he has apologized on many occassions to the individual who was offeneded. I have even seen post where wildcat praises this gentleman over and over again and recommends him for their future rifle builds, and guys like you continue to hound the guy. Really, get over it and find some better way to spend your time. Everytime wildcat post about his rifle, you guys have to hijack his post with this bull---t.

P44



It has nothing to do with offending any one IMHO......
 
Moman, thanks. Yes I am getting pretty excited about this rifle. I know I have posted a bunch about this rifle and as you can see there are a few who like to try and, as P44 said, poke fun. Anyhow, I had to sell all of my rifles about a year half ago, so I have been pretty excited about receiving this rig.

W.
 
Status
Not open for further replies.

Recent Posts

Top