300 PRC

[snowcreekkennels]

Seeing what speeds you are seeing out of 300 PRC with N570 and 24 inch barrel with the 216 Berger Hybirds.

 

[nal3470]

Is the 216 the new one or something

 

[nal3470]

Is the 216 the new one or something

Gotta give him a lil bit of a hard time since he's a local buddy

 

[Reemty J]

1 grain better than the 215, huge difference in BC

 

[7.62 Gunner]

I hear the 216 is also just as available

 

[nal3470]

Only good for ranges of "infinity and beyond"

 

[wasskeet]

Here's a recipe with N565 from a highly regarded custom ammo maker that I find very hard to imagine without a 32" barrel or....?

MAYHEM- 300 PRC 215 Berger Hybrid Target - Unknown Munitions

CALIBER 300 PRC BULLET 215 BERGER HYBRID TARGET BRASS HORNADY | ADG | LAPUA POWDER VIHTAVUORI N570 PRIMER FEDERAL 215 MATCH VELOCITY 3100 (ADG) G1 / G7 .691 / .354 COAL 3.700″ REC. TWIST 9 QUANTITY 50

www.unknownmunitions.com

 

[snowcreekkennels]

Is the 216 the new one or something

I have a box for you to try in your new PRC.

 

[nal3470]

I ordered 97boxes that was the limit

 

[snowcreekkennels]

Would you sell me a few I couldn't get but 3.

 

[6.5saum/300rum]

Here's a recipe with N565 from a highly regarded custom ammo maker that I find very hard to imagine without a 32" barrel or....?

MAYHEM- 300 PRC 215 Berger Hybrid Target - Unknown Munitions

CALIBER 300 PRC BULLET 215 BERGER HYBRID TARGET BRASS HORNADY | ADG | LAPUA POWDER VIHTAVUORI N570 PRIMER FEDERAL 215 MATCH VELOCITY 3100 (ADG) G1 / G7 .691 / .354 COAL 3.700″ REC. TWIST 9 QUANTITY 50

www.unknownmunitions.com

I agree with you! This seems impossible. I happen to have all these components so I'm going to try to work up a load. I'm guessing I can't get over 2900fps with a 24" barrel.

 

[Jgill19]

I've got a 26" barrel, but am getting 3090-3095 w/83.0gr of IMR8133 and the 205 berger

 

[loonie]

I have no problem getting 3100 fps in mine with RL26 and 210 ABLR . 26 inch Lilja 3 groove.

 

[Montucky Roamer]

24" proof, with Dominus suppressor.ADG brass, 2950 with 215 and RL 26 is top end in my barrel. I'm leaning on it a bit.
Not sure how 3100 with a normal barrel is even remotely possible. Maybe a 32" barrel and n570 and brass with higher capacity?