300 PRC loads

[Bergara300LR]

I purchased a Bergara B14 HMR in 300 PRC. I would like to know if anyone on here has a good consistent load worked up for that caliber. And would you mind shareing your info please

 

[nwmnbowhunter]

What supplies do you have or have access too?

Brass brand
Bullets
Powder
Primers

And what are barrel specs? Length and twist?

 

[Recon$$]

Hornady brass, Fed 215, 212 ELDX .01 off lands.

Rifle 1: 73.5 N565 @ 2815 .3 moa 26" tube
Rifle 2: 76.0 N565 @ 2875 .55 moa 24" tube

I am working on trying to get some 199 HH shooting in Rifle 2. I'll post my results if I find something decent.

 

[Dmagna]

Buy some adg or lapua brass, don't waste time with Hornady. Then get some N-570, N568, N565, H1000, or Retumbo. Then buy some bullets, I like Berger 215s. But had good luck with some eldm and eldx bullets. Havnt shot hammers yet. I would hold off on hammers if you are not an experienced reloader, it will get expensive quick. The 300 prc should be shooting 200-220 grain bullets near 3000fps.

 

[wasskeet]

In a B14 Ridge, a Berger 205 EH, 77gr H-1000, 215M and Hornady case did well for me. Sub-MOA at 100yds. and slightly over MOA at 1000yds.

 

[Bergara300LR]

Hornady brass, Fed 215, 212 ELDX .01 off lands.

Rifle 1: 73.5 N565 @ 2815 .3 moa 26" tube
Rifle 2: 76.0 N565 @ 2875 .55 moa 24" tube

I am working on trying to get some 199 HH shooting in Rifle 2. I'll post my results if I find something decent.

Thanks you

 

[jraulsten]

Lapua brass
CCI 250
215 Hybrid .020 jump
80.6 grains N570

 

[257 STW]

79.6 Ramshot Magnum @3002 avg 26" barrel
CCI 250
Berger 215s .025 OL
Hornady Brass
.5 moa @500
I have never grouped this load past 500, but I have verified drops to 1600
AND AS ALWAYS START LOWER AND WORK UP IN YOUR RIFLE

 

[Shane Lindsey]

Good morning,

For those loading these with a 215, 245, or 220 ELDX, what are your COAL for each? I have a HS DBM that allows for 3.69" and curious if this will be sufficient. Currently set up as a 7mag loading the 190s about 3.595".