• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

30-378 weatherby load data

wtdii2d

Member
Joined
Nov 13, 2014
Messages
18
Location
dallas texas
Hello fellow LRS. Im working on loading for my 30-378 and was wondering if any one has loaded the Barnes 200gr LRX BT in their 30-378. Any info or load data would be helpful. Im going to work up loads in retumbo h50bmg and h1000.
 
I'll be keeping an eye on this thread. Been thinking about that bullet, but need to work up a load for the 215 Berger first.
 
Hello fellow LRS. Im working on loading for my 30-378 and was wondering if any one has loaded the Barnes 200gr LRX BT in their 30-378. Any info or load data would be helpful. Im going to work up loads in retumbo h50bmg and h1000.

Try some H870, that's what my Uncle uses in his with a 190gr SMK.
 
I haven't shot the Barnes bullet, but I have shot the 200 gr. SMK. My most accurate load is 117 gr of H50BMG (OAL 3.645" & WLRM primer).

I also used 118 gr. of US869 with 200 gr. Accubonds and had respectable results. Same OAL and primer.

All shots were from a Weatherby Accumark.
 
Hey tomt!

I've been using 98 grains of H1000 with the 210 Berger VLD target. Less than 1 MOA. If I was 30 years younger I could probably shave a little more off that. :rolleyes:
 
2d, great accuracy with the "Broz" load of H 1000, 210 Berger and 215M primer in my 30/378 Mark V 26". Will soon try his load for the 215 and 230 Bergers, but the 210's shoot so well I hesitate. Good luck
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top