I want to read that BOOK! I like it, do you know your velocity?
22 CREEDMOOR
- Thread starter ickes123
- Start date
Help Support Long Range Hunting Forum
sable tireur
Well-Known Member
- Joined
- Oct 8, 2010
- Messages
- 3,391
This is not my data, this is from an answer found on the first page. I just rotated the picture for easier reading.
Do you have your velocity that you were getting from this load with 4831? Awesome shooting by the way!
That's for letting me know.This is not my data, this is from an answer found on the first page. I just rotated the picture for easier reading.
Aoudad 101
Well-Known Member
Rem 40 stainless, kreiger 1&8 . 28 inches long. All my guns pretty much same .
Attachments
Aoudad 101
Well-Known Member
I have it slowed down
Attachments
Why change when something works.
Great looking kid with a infectious smile.
Are your stocks HS precision?
Hal
I had them shooting 3250 out of a 26" and shooting about 1/2" maybe a bit better.
quigley257
Well-Known Member
Lots of great info on the 22 Creed here... https://www.petersoncartridge.com/technical-articles/posts/2020/april/22-creedmoor-load-data/
Like many early adopters, I found out I was running well above acceptable pressures in my early loadings. I run a 1/7 twist in my rifle to shoot the 95 SMKs but when it comes time for a new barrel, I will be going with a 1/8.
Like many early adopters, I found out I was running well above acceptable pressures in my early loadings. I run a 1/7 twist in my rifle to shoot the 95 SMKs but when it comes time for a new barrel, I will be going with a 1/8.
Aoudad 101
Well-Known Member
Yes
