22 creedmoor

John Roland

Active Member
Joined
Jul 13, 2018
Messages
41
Location
Portland, texas
I am sure this my have been covered in other post, but I am looking at building a 22 creedmoor to shoot 80 to 95 grain bullets and some of the hammer bullets. Mostly for hunting not over 500 yards. I need help with barrel lenght and which twist rate to run. I appreciate any help any of you can give.
 
I was in the same boat recently… I ended up going with a Bartlein 22" 1:7.5 twist medium palma. The 1:7.5 should be enough to stabilize the 95s without being too much twist for the lighter bullets.

For what's it's worth, my 1:8 22/250 AI (very similar to 22 CM) does extremely well with the 88 gr ELDM but could not stabilize the 95 gr SMK.

Here's a 14-15 inch "group" with the 95 gr SMK (red circles) followed by a 5 shot group with the 88 gr ELDM.
7CBCA48D-CBD0-4D00-9938-3C50323A3709.jpeg
24B3A086-D404-428F-A2DF-DD011D20A615.jpeg
2B1B8723-3A1C-468E-8F95-9825C9C36454.jpeg
 
Last edited:
I have a Remy 700 shorty with a CBI 7.5 twist 24" long. It shoots everything 73-85.5 grain at 1/2" or better. It didn't really like 95 grain pills but I didn't mess around with load mixes either. A full custom on Curtis axiom loves 69-77 grain out its 8 twist Kreiger. No group has been over 1/4"! Full custom on Lone Peak Razor prolly my tightest group ever out a Oregon Mountain Rifle's Carbon barrel 8 twist just got it together and only shot 2 groups of 3 69 Sierra TMK all shooting Peterson Brass and H4350. I just haven't gotten around to try any heavier bullets out of the full customs. I must warn you your going to fall in love with it!!!! 85.5 we're running 3300 the 69's we're running 3600 no problem I had 3700 but backed down to take it easy on the brass I never did find pressure tho.
 

Attachments

  • 2683C4D1-6A9C-4174-A6AD-ACAF93896574.jpeg
    2683C4D1-6A9C-4174-A6AD-ACAF93896574.jpeg
    279.1 KB · Views: 131
  • 0C243272-9336-44F6-B5F4-19AC8963C8C0.jpeg
    0C243272-9336-44F6-B5F4-19AC8963C8C0.jpeg
    2 MB · Views: 123
  • 4CB68BB7-09C7-4FA4-860E-1300091CC0D6.jpeg
    4CB68BB7-09C7-4FA4-860E-1300091CC0D6.jpeg
    105.8 KB · Views: 122
  • 37EE9764-D035-4601-AD0C-C713162093A4.jpeg
    37EE9764-D035-4601-AD0C-C713162093A4.jpeg
    2.4 MB · Views: 118
  • 5612C67D-B643-444E-811E-6D11588AE8BA.jpeg
    5612C67D-B643-444E-811E-6D11588AE8BA.jpeg
    2.5 MB · Views: 121
  • 0FA7D03D-4466-4465-A715-F1F8F6D3242D.jpeg
    0FA7D03D-4466-4465-A715-F1F8F6D3242D.jpeg
    1.3 MB · Views: 132
I was in the same boat recently… I ended up going with a Bartlein 22" 1:7.5 twist medium palma. The 1:7.5 should be enough to stabilize the 95s without being too much twist for the lighter bullets.

For what's it's worth, my 1:8 22/250 AI (very similar to 22 CM) does extremely well with the 88 gr ELDM but could not stabilize the 95 gr SMK.

Here's a 14-15 inch "group" with the 95 gr SMK (red circles) followed by a 5 shot group with the 88 gr ELDM. View attachment 290079View attachment 290080View attachment 290081
Thanks. Great shooting
 
I have a Remy 700 shorty with a CBI 7.5 twist 24" long. It shoots everything 73-85.5 grain at 1/2" or better. It didn't really like 95 grain pills but I didn't mess around with load mixes either. A full custom on Curtis axiom loves 69-77 grain out its 8 twist Kreiger. No group has been over 1/4"! Full custom on Lone Peak Razor prolly my tightest group ever out a Oregon Mountain Rifle's Carbon barrel 8 twist just got it together and only shot 2 groups of 3 69 Sierra TMK all shooting Peterson Brass and H4350. I just haven't gotten around to try any heavier bullets out of the full customs. I must warn you your going to fall in love with it!!!! 85.5 we're running 3300 the 69's we're running 3600 no problem I had 3700 but backed down to take it easy on the brass I never did find pressure tho.
Thanks. Great information.
 
I am running a 26" 1&7twist barrel running 85.5 Bergers at 3260fps shot steel at 1050yds today in 14mph wind you will really like it I can run 73 gr hammer hunters 3600fps they are deer killers
 
I have a Remy 700 shorty with a CBI 7.5 twist 24" long. It shoots everything 73-85.5 grain at 1/2" or better. It didn't really like 95 grain pills but I didn't mess around with load mixes either. A full custom on Curtis axiom loves 69-77 grain out its 8 twist Kreiger. No group has been over 1/4"! Full custom on Lone Peak Razor prolly my tightest group ever out a Oregon Mountain Rifle's Carbon barrel 8 twist just got it together and only shot 2 groups of 3 69 Sierra TMK all shooting Peterson Brass and H4350. I just haven't gotten around to try any heavier bullets out of the full customs. I must warn you your going to fall in love with it!!!! 85.5 we're running 3300 the 69's we're running 3600 no problem I had 3700 but backed down to take it easy on the brass I never did find pressure tho.
How much freebore?
I have a Remy 700 shorty with a CBI 7.5 twist 24" long. It shoots everything 73-85.5 grain at 1/2" or better. It didn't really like 95 grain pills but I didn't mess around with load mixes either. A full custom on Curtis axiom loves 69-77 grain out its 8 twist Kreiger. No group has been over 1/4"! Full custom on Lone Peak Razor prolly my tightest group ever out a Oregon Mountain Rifle's Carbon barrel 8 twist just got it together and only shot 2 groups of 3 69 Sierra TMK all shooting Peterson Brass and H4350. I just haven't gotten around to try any heavier bullets out of the full customs. I must warn you your going to fall in love with it!!!! 85.5 we're running 3300 the 69's we're running 3600 no problem I had 3700 but backed down to take it easy on the brass I never did find pressure tho.
How much freebore?
 
I was in the same boat recently… I ended up going with a Bartlein 22" 1:7.5 twist medium palma. The 1:7.5 should be enough to stabilize the 95s without being too much twist for the lighter bullets.

For what's it's worth, my 1:8 22/250 AI (very similar to 22 CM) does extremely well with the 88 gr ELDM but could not stabilize the 95 gr SMK.

Here's a 14-15 inch "group" with the 95 gr SMK (red circles) followed by a 5 shot group with the 88 gr ELDM. View attachment 290079View attachment 290080View attachment 290081
Which one do you like better the 22-250ia or the 22 creedmoor?
 
Top