22/284 70 HH

[pickens72]

i built a 6-284 win some years ago...and after some throat burnup after only 300 rounds, I've labeled it a barrel burner. A22- 284 would be hard to keep bullets from turning to dust.
I may have to try the full on copper route.
In fact when first loading some 107 gr SMK for my 6-284 some bullets turned to dust around 3350 fps. 30 inch lilja barrel. 1 1/4" all the way with a muzzle brake to spot my own shots

I only run hammers in mine so dont half to worry bout blowing up bullets aa far as barrel life i got 600 rds out of my first one. They r hunting rifles and have threads so dont worry about barrel life!

 

[willfrye027]

I only run hammers in mine so dont half to worry bout blowing up bullets aa far as barrel life i got 600 rds out of my first one. They r hunting rifles and have threads so dont worry about barrel life!

Can you give us some more specs on your barrel/chamber/load data? Brass prep? Powders? Thanks

 

[pickens72]

Can you give us some more specs on your barrel/chamber/load data? Brass prep? Powders? Thanks

Well iv got 4 of them. This one here is a 7.5 twist shilen 4 grove, 24 in barrel running quality cartridge brass necked turned! Also 2 7 twist 26in in barrrl guns i run 6.5/284 lapua brass necked down im them. 73 absolutes in one at 3880, new 76 absolute in the other at 3850, also have a 9 twist run 77 tmk in it some at 3750! And 64 hh at 4k

 

[Pdvdh]

Well iv got 4 of them. This one here is a 7.5 twist shilen 4 grove, 24 in barrel running quality cartridge brass necked turned! Also 2 7 twist 26in in barrrl guns i run 6.5/284 lapua brass necked down im them. 73 absolutes in one at 3880, new 76 absolute in the other at 3850, also have a 9 twist run 77 tmk in it some at 3750! And 64 hh at 4k

My hero!