7mm rem 146 HH load data.

[Rob7mm]

In the next few months will be installing a Criterion 1/8 twist barrel on a savage 110 action. Looking for load data to use. Most shots will be over 500 yards. Have some 146 HH to try. Know their load data does not match up to normal rounds. Will start of 10% lower then what you guys recommend. Having a hard time getting into the hammer forum for whatever reason. May get 15 of the 130 grain as well. Will primarily be used for Deer hunting with a hog hunt thrown in here and there. Maybe an elk hunt in the future. Thanks for the recommendations in advance

 

[Varmint Hunter]

If you are really looking for speed, RE26 will be the top dog. You can use data for a cup & core bullet of similar weight. Steve recommends using Nosler data as a start. I had no problem using book loads. In all likelihood the Hammer bullet will produce LESS pressure than the C & C bullet of the same weight.

 

[Rob7mm]

OK. Thank you very much. Will look at that for load data.

 

[GLTaylor]

Did you look at Hammer Hunter Load Data on this Forum? All the data for Hammer Hunters and Absolutes are posted here too.

 

[Rob7mm]

OK. Will see if I can find them on Herr. Thanks.