22-250 rem

waylon

Well-Known Member
Joined
Dec 29, 2004
Messages
67
Location
tenn
Need some starting loads 50gr vmax bullets and hod. verget powder. Rifle is a rem vs700 with a 26 inch barrel /ubbthreads/images/graemlins/laugh.gif
 
Check out reloadersnest.com. They've got loads of them. Here's one:

LoadID 7143
Bullet Nosler Ballistic Tip
BulletWeight 50 grs
Powder Hodgdon Varget
PowderWeight 38.9 grs
Primer CCI 200
Brass Make Remington
Barrel Length 26 (inches)
C.O.L 2.1 (inches)
Velocity 3911 fps
Group (inches by 3 shot at 100 yds)
Submitted Date 4/1/2003 8:51:00 AM
Submitted By [email protected]
Gun Info
Comment Shoots at under half inch @150 yrds

VH - ****Note*** These are NOT "starting loads".
 
I loaded some early today with 40gr of hod verget and shoot it across the chronograph and the speed was very low 2630 I thought something was wrong with it so I got may 223 out and it shoot 3330 like it always has any suggestions whats wrong /ubbthreads/images/graemlins/confused.gif
 
Not sure what the problem is but according to Hodgdon you are already over the maximum recommended charge for a 50gr bullet. Are you sure of the charge weight in those cases?

For reference, I took this off Hodgdon's web site:

22-250 Rem

50 GR. SIE SP
COL: 2.350"

H4350 42.0 3579 48,900 CUP
H414 40.0 3765 48,600 CUP
H380 41.0 3742 45,300 CUP
VARGET 37.5 3834 50,400 CUP
BL-C(2) 34.5 3740 48,400 CUP
H335 34.5 3753 48,700 CUP
H4895 36.5 3827 50,200 CUP
BENCHMARK 36.0 3903 51,400 CUP
H322 32.0 3628 50,300 CUP
 
Yes I started with 35.0 gr and went to 36.0gr and shoot across the chornograph and was slow then I went to 40gr with no improvment. Then I switched to benchmark with no improvment and was little over loaded blew the primer out at 40gr of powder. The dies I am using a rcbs comp. dies is this the problem /ubbthreads/images/graemlins/confused.gif
 
50BMG,
You may want to shoot over another crony! My pet loas in 50 gr vmax,36gr IMR 4895, fed 210M for 3800 fps and shoots in the .2s all day.
 
Yes, shoot over another chrony, then try H380 (start with 37 grains with the 50 grain bullets). I like CCI BR2 primers.

You know, some 22-250s like 4895 and others hate it. Mine did not care for it but loved H380. Both powders are excellent for the 22-250. Varget can be good as well.
 
Warning! This thread is more than 20 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top