200g Accubond load for .300 WSM

Papershredder

Member
Joined
Mar 9, 2015
Messages
5
Hey guys looking to try some 200g Accubonds in my .300WSM. Just wondering if anyone has any load info they would be willing to share. I always start my load development below any load info I get and work my way up. I have a few different powders on hand right now including Retumbo, RL17, RL22, 4350, 4831, and 7828.
 

Shortmagman

Well-Known Member
Joined
Feb 22, 2008
Messages
487
Location
Memphis Tn
I have only tried H4350 with the 200 Accubond. I was not trying to get the most velocity, I was only trying to see if my gun would shoot the 200 grain bullet. My gun did ok but I dropped the project and started working with Berger 190's and IMR-7828. If you look on the Nosler web site they show IMR-7828 to be their most accurate powder with the 200 grain Accubond. I have not tried that load but my gun does very well with 190 Bergers and IMR-7828.
 

Papershredder

Member
Joined
Mar 9, 2015
Messages
5
Thanks for the reply. I am also considering going back to a .300 RUM again. Looking at the North American from the Remington Custom Shop.
 

Trending threads

Top