The old 150 gr Ballistic Tips were horrible.The newer ones are much better. Basically a non-bonded Accubond.I used to shoot the 150ge ballistic tip; however, I was having issues with the bullet detonating on the surface at that speed if I didn't judge the correct angle. The 154 sst solved that for me and my son. Between the two of us, since starting to shoot this load, have shot 8 PA bucks under 120 yds, and one has yet to take a step. Not one.
Now even better, lol, is the 139 Hornady interlock boat tail. I shoot them in my 280 at 2900 and I have shot over 70 PA deer with this load since I bought the gun in 1994 (Browning ABolt). The furthest was 300 yds. And nearly every single one has died in 10 yds. That bullet at that speed is the perfect combination of speed/ power and this is my go to rifle and will be to the grave.
Course keep in mind that the "old ones" was about 1987 or so...........The old 150 gr Ballistic Tips were horrible.The newer ones are much better. Basically a non-bonded Accubond.
That's a around the time I was trying them. Late 80s early 90s.Course keep in mind that the "old ones" was about 1987 or so...........
Wish I could help but I have been running 140bts in my Browning Hells canyonAnybody have good accuracy loads for a 7mag with 150 grain bullets? I have a Browning X bolt speed with a 9 1/2 twist.
www.nosler.com