147gr eld in 6.5 creedmoor?

[kk alaska]

How is accuracy with RL 26 with the 140 gr and 147 gr loads? Thanks

 

[jwing]

147 eld m. Moly
44.0 Imr 4955
wLR
3.161 comparator hex nut.

2765 fps
Es 3
.2 at 100y

 

[Bowfishn]

Sweet load, you were not kidding when you said you were getting good results with IMR4955, and it is supposed to be temp stable, QL shows about that velocity with that bullet and moly at only 56556 psi. So should equal good barrel life.
Should be a good one for anyone looking for a 4350 alternative.

 

[jwing]

Can you post ql, for me? 140s shoot great you can get 2900, 2850 is max with 147.. it's a bulky powder so 46 is max I going to try 44.5 I am good with 2800 in a creedmoor

 

[Bowfishn]

Can you post ql, for me? 140s shoot great you can get 2900, 2850 is max with 147.. it's a bulky powder so 46 is max I going to try 44.5 I am good with 2800 in a creedmoor

Can you give me Case volume H2O and COAL Base to bullet tip not with a comparator.

 

[jwing]

I will have to get oal, I am using new hornaday case, switched to Norma for next test, going to zero at 200 and shot 500, 800, 1000 for groups..

 

[bigbulls]

Tagging on

 

[bigdaddyWSM]

I have 2 good loads for the 147 eldm & H4350.
low great load is 41.4 gr, Gunwerks LRP brass. MV of 2659 in 58 or 38 degrees temps single digit SD/ES for either except the .030 was a tad better. first batch was loaded .020 off lands, second were .030 off.
Higher load was 42.4 gr with .030 off lands MV of 2742 SD of 4.9 ES of 10, both groups were .3ish @100 yds.
This is from a factory Howa 1500 24" barrel I put in a KRG Bravo chassis.