• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

1 Piece Base &

1100 Remington Man

Well-Known Member
Joined
Jan 6, 2011
Messages
335
Location
Iowa
With a standard one piece base with Windage screws on rear of base how much will one see in MOA change will one see with one turn of screw on base at 100 yds ? Thanks
 
The thread pitch is 32 per inch, or .031"/thread. If the rings are separated by 4", the windage angle for one full rotation is
(.031"/4")x1000x3.375=26.2 MOA.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top