I fondled one at dealers a couple of weeks ago...turned out she was a customer!!
375 EnABELR Build
- Thread starter SheepShapeAK
- Start date
Help Support Long Range Hunting Forum
Chassis is ordered and barrels, action, and reamer should be with Shaen on Monday.
I could only find 375CT magazines online, but Bob at Mirage ULR was able to order me some that are made for the 375 EnABELR.
Mags are the same size, but the ribs are a little different.
Attached pic shows the comparison of a magazine for a 300WM and the 375 magazine.
Attachments
Scope is here. Just waiting on the barreled action to get back from the smith.
I'm just here to see how this turns out. This has been on my list to build. That or a ct
I looked into the CT, but wanted something I could magazine feed.
I'm not sure what all you are wanting and what your building it on but you can mag feed a ct. I haven't read through what all you have yet just glanced through and thought I'd subscribe and see how it turned out for ya.
Last edited:
You can mag feed with a CT, but from what I found in my research is you are very limited as to what bullets you can use. With the EnABELR I can seat the bullets as long as I need to without any limitations.
I agree with that. I haven't looked into it that deep yet. Good luck with your build. Looking forward to seeing it on here.
You're well on your way Brother....go...go..go!
Guess I should get some load development going.
Chambered barrels and action arrived today. They were chambered by none other than Shaen Magan. He built my 338 Norma and it's an absolute tack driver.
As the rifle sits it is coming in at 27lbs. I figure 35lbs with a magazine and ammo.
Chambered barrels and action arrived today. They were chambered by none other than Shaen Magan. He built my 338 Norma and it's an absolute tack driver.
As the rifle sits it is coming in at 27lbs. I figure 35lbs with a magazine and ammo.
Last edited:
QuietTexan
Well-Known Member
Broooooo
Awesome
Awesome
Calvin45
Well-Known Member
Now THAT is a LAWNDART!!!!Now that the reamer is headed to the house I figured I would start this thread. This will be a ground squirrel hunting rig, launching the badlands 365 and 390 grain Super Bulldozer-2's.
Approaching a year next month on my suppressor. So much for 90'day e-forms.
Second barrel is on the way to the house, and reloading components and dies are sitting in the office.
Cartridge: 375 EnABELR
Action: 1.6" Stiller TAC Driver, .640" bolt face, 40 MOA rail.
Barrel: 30" 1:8 twist K&P 1.35" straight contour
Trigger: Triggertech Diamond
Scope:
Chassis: Mirage ULR
Bipod: Still undecided. Maybe the elite iron revolution.
Suppressor: Elite Iron 375 Asset
375 EnABELR with a 390 grain SBD2 next to a 458 SOCOM case.
View attachment 480246
View attachment 480243
Calvin45
Well-Known Member
Just out of curiosity…does anyone have case capacity numbers for the 37xc, 375 eNABLR, and .375 cheytac? I'm finding conflicting numbers online. Not in the market for any, just curious. If I recall the enabler is somewhere between those two? Supposed to get very close to cheytac numbers with much more consistency, sort of like the relationship between a 28 nos and 7 rum?
