difference in large rifle primers?

mcmillenbr

New Member
Joined
Jul 7, 2011
Messages
1
Location
Indianapolis, IN
Could someone tell me the difference between remington no. 91/2 Large Rifle Primers and CCI Large Rifle Primers.
We had a shortage of Large rifle Primers here for a while and the guy at the gun store told me that there was no difference. I was wondering why there was a large stack of no.91/2 primers and no other manufacturer. I dont want to blow something up if there is a difference.
 
They are pretty close.

I wouldn't have a problem switching between the two. ...although, I prefer the CCI BR2's or Fed 210M for consistency.

If you're pushing maximum loads, then back down and work up your load again.

Production seems to be bursty. So, you'll find one brand at times when others aren't available.

-- richard
 
I have definitely seen differences in performance between primers, even within the same classification ie. Large rifle. I have a Rem 308 Milspec 308 that shoots best with standard Win LR primers with IMR 4895. Tried other LR's, and Match primers, double checked with my chronograph and confirmed with velocity spread. If the goal was 1 MOA, no difference would be seen but combo gave consistent .25-.5moa. Precision Shooter Magazine had a study a couple of years ago that measured the flash intensity produced by different primers and you could clearly see differences. The bench rest guys at my club are fanatics about this and buy there primers in 5000 ct. of the same lot.
 
I have definitely seen differences in performance between primers, even within the same classification ie. Large rifle. I have a Rem 308 Milspec 308 that shoots best with standard Win LR primers with IMR 4895. Tried other LR's, and Match primers, double checked with my chronograph and confirmed with velocity spread. If the goal was 1 MOA, no difference would be seen but combo gave consistent .25-.5moa. Precision Shooter Magazine had a study a couple of years ago that measured the flash intensity produced by different primers and you could clearly see differences. The bench rest guys at my club are fanatics about this and buy there primers in 5000 ct. of the same lot.

My comments were relative to safety/practicality.

Primers definitely factor into ultimate precision.
 
Ran across this chart a while back, it ranks primers by relative power. I do not know how much testing went into this, but I have found that when I went from one primer to another in testing various loads that the primers listed with more power did tend to increase pressure and velocity with same powder and bullet.

Dave



Primer Testing Reference
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top