Your, 6.5prc 147 eld-m load

[25WSM]

I run 147 eldm in a saum at 3150 and it kills like lightning. 3 bucks and a doe so far with it. Bullet did not exit on 3 of them. Rib cage shots on all. I dont know I would trust them on game bigger than deer. My personal opinion. Ive shot several 1000 of these in the 2950 to 2900 range in my creed 1000 yard rifle and never once had one blow up on the way to the target. These bullets are very accurate and slippery in the wind. I wouldn't hesitate to recommend them on deer or similar size game.
Shep

 

[BrentM]

55.5 rl26 at 2915 with a 22". 2815 in a 18".

 

[MLN1963]

I run 147 eldm in a saum at 3150 and it kills like lightning. 3 bucks and a doe so far with it. Bullet did not exit on 3 of them. Rib cage shots on all. I dont know I would trust them on game bigger than deer. My personal opinion. Ive shot several 1000 of these in the 2950 to 2900 range in my creed 1000 yard rifle and never once had one blow up on the way to the target. These bullets are very accurate and slippery in the wind. I wouldn't hesitate to recommend them on deer or similar size game.
Shep

You are pushing a 147 to 2950 in a Creedmoor? Those are PRC speeds aren't they?

 

[MT-Shooter]

Anyone ever try us 869 I remember seeing a article were it did pretty good, can't remember what weight bullets.

Yes, shoots well with the 147 ELDM bullets.

 

[TAZMAN]

58.5 grains H1000/ 147 ELDM/210 primer at 2950FPS with a ES of 5fps. 22 inch barrel Short Action Customs build.

 

[buckbrush]

You are pushing a 147 to 2950 in a Creedmoor? Those are PRC speeds aren't they?

Guessing the 2950 was supposed to be 2850...but still. My brass is coughing up primer pockets at 2750.

 

[Alwayslearning]

58.5 grains H1000/ 147 ELDM/210 primer at 2950FPS with a ES of 5fps. 22 inch barrel Short Action Customs build.

What's your overall length on this? What brass are you using. Thanks in advance.

 

[TAZMAN]

I use Hornady brass and it is at mag length. I will look again.