Great Custom rifle for sale, lots of options.
$3550 shipped for all
Started life as a Remington 700
Trued action, pinned recoil lug and side bolt release by Kampfeld Custom
Nightforce 20moa base
Apa Bolt Knob
Remington 700 SS Trigger
Manners MCS-T Molded in Camo Stock
Terry Cross Adj Cheek
Fixed STD LOP
3 bottom studs
4 flush cups 2 left 2 right
Professionally bedded by APA
Apa RTG DBM
1 5 round AICS mag w/ front Plate Removed
couple of scratches on the forend from barracde shooting
i small chip in the bolt recess, pics below.
3 Barrels, all are indexed for easy removal and installation
308
26in 1-12 SS 5r Krieger
APA little bastard brake
Set up and done by Dave while at APA for 155.5g bergers, shoots them at 3k + (might not shoot all factory ammo) but great for the 155 class bullets.
800 rounds through that barrel
260
28in 1-8.5 SS 4 groove Krieger
chambered by Roscoe at Lousiana Precision
1650 rounds down this tube
243
26inch 1-8 ss 4 groove Krieger
Chambered by Jered at APA
a little less than 900 down the tube
The 308 barrel is currently installed, i just had that barreled action and the 5 round Aics mag spray in black Cerakoe, its unshot and in perfect condition.
260 barrel is coated in FDE/Brown by Birdsong
243 is still SS but sprayed in OD Krylon
I do have 2 10 round Alpha mags but they were giving me fits went back to AICS personally
extra
Redding Competition 260 Dies
Includes wilson bushings for the 243 lapua brass as well as 3 various 260 bushings
250 plus pieces of twice fired 243 lapua brass
320 plus pieces of r.p. 260 brass, fired 3 times was annealed after 2nd firing, neck turned
Giraud 260 case trimmer complete set up.
$3550 shipped for all
Started life as a Remington 700
Trued action, pinned recoil lug and side bolt release by Kampfeld Custom
Nightforce 20moa base
Apa Bolt Knob
Remington 700 SS Trigger
Manners MCS-T Molded in Camo Stock
Terry Cross Adj Cheek
Fixed STD LOP
3 bottom studs
4 flush cups 2 left 2 right
Professionally bedded by APA
Apa RTG DBM
1 5 round AICS mag w/ front Plate Removed
couple of scratches on the forend from barracde shooting
i small chip in the bolt recess, pics below.
3 Barrels, all are indexed for easy removal and installation
308
26in 1-12 SS 5r Krieger
APA little bastard brake
Set up and done by Dave while at APA for 155.5g bergers, shoots them at 3k + (might not shoot all factory ammo) but great for the 155 class bullets.
800 rounds through that barrel
260
28in 1-8.5 SS 4 groove Krieger
chambered by Roscoe at Lousiana Precision
1650 rounds down this tube
243
26inch 1-8 ss 4 groove Krieger
Chambered by Jered at APA
a little less than 900 down the tube
The 308 barrel is currently installed, i just had that barreled action and the 5 round Aics mag spray in black Cerakoe, its unshot and in perfect condition.
260 barrel is coated in FDE/Brown by Birdsong
243 is still SS but sprayed in OD Krylon
I do have 2 10 round Alpha mags but they were giving me fits went back to AICS personally
extra
Redding Competition 260 Dies
Includes wilson bushings for the 243 lapua brass as well as 3 various 260 bushings
250 plus pieces of twice fired 243 lapua brass
320 plus pieces of r.p. 260 brass, fired 3 times was annealed after 2nd firing, neck turned
Giraud 260 case trimmer complete set up.
