What powder for your 6mm Creedmoor

Im looking in the direction of getting a 6mm Creedmoor and just wanted to know what powder you guys are using for your accuracy loads. I will be shooting either the 108 Bergers, 108 ELD, or the 103 ELD-X
I run 42.5 grains of H4350 with the 103 ELDX in my Stiller Predator 6XC- 7.5 twist Schneider barrel , lights out for accuracy and death on feral hogs.
 
We are shooting Bergara b14 26" 1:8 loaded with 43.6 gr 6.5 staball with 108 eld seated 2.75" OAL. we are getting 3100. The Berger's needed a little more seating depth to get the accuracy we were looking for. Getting .25" spread at 100 yards. We have to be careful with our powder choices here in West Texas because of the temperature extremes. A lot of powders just won't work for us.
I've found that the Reloader powder Is just to hot for any shooting above 80*F. I've tried 17 & 19 but quickly shelved them. I'm thinking of trying some VV N-160 with my 109 Berger s
 
F0527FF3-560D-4F1E-A6DB-42188760F6B6 6.jpeg

Didn't realize that I've already trialled N-160. (I really need to stay focused…neah!!).
Now I think I'll use it for deer season. 😊
 
Reloader 16 and H4350 are the best two powders for bullets in the 100-109 gr range for the 6CM. RL-16 gets a little more speed than H4350 with equal pressures. Both are very temp stable with RL-16 being slightly more temp stable.

StaBall 6.5 is good and relatively temp stable for a ball powder but not nearly as stable as RL-16 and H4350.
 
I've been using superformace to push 115gr Berger's. There are many great options. Test several and see what works well in your gun.
 
4.17 grains H4350
Peterson brass w/F210M
Berger 105 H-Vlds
25" 2B Bartlein barrel 1:8 Twist
3197 fps suppressed
 

Recent Posts

Top