Viper PST 6x24 elevation adjustment issues....

[michael obrien]

So I just got my scope mounted on the new Browning 6.5 Creed and I was hoping to get out this evening to shoot it for the first time, but I have a question.

Once sighted in, there doesn't seem to be an ability to set that mark at the bottom of the elevation adjustment- is there? I sighted down the bore at a mailbox 100 yards away, adjusted the scope to the same point, and im left with 35 moa's up and 30 below point of impact. Is there anyway to reset this?

thanks

michael

 

[Scottytuned]

If you need more top end, you could always run an MOA base to get you out further. I always figure that with something like the PST with 65 MOA, you will get half above, and half below. Maybe some others will know how to do it, but I guess I have always lived with it.

 

[ShtrRdy]

If you're wondering about resetting the turret cap so that it reads zero, I think there are 2 or 3 set screws that you can loosen and turn he cap to zero. There should also be shims for you to place a "close to" zero stop.

 

[Catahoula]

If you fall in love with that scope, I will sell you mine DIRT CHEAP!
Thanks, Kirk

 

[Prostaff]

If you fall in love with that scope, I will sell you mine DIRT CHEAP!
Thanks, Kirk

How much you want for it? Is it broke?

 

[michael obrien]

If you fall in love with that scope, I will sell you mine DIRT CHEAP!
Thanks, Kirk

I'm shooting it today, I'll let you know

Michael

 

[Catahoula]

it's not broke. I don't like the eye relief.
Thanks, Kirk