DoubleGobble00
Well-Known Member
- Joined
- Nov 5, 2007
- Messages
- 323
I want to work up a load for my 300 win mag with the 208 AMAX or the 210 bergers using VV560. What is a good starting point? I ran QuickLoad and the max load appeared to be 74 if I did it correctly so if I start 10% lower that would put my around 66 grains of vv560. Is this correct? I just want to be sure before I start loading up tomorrow. I am currently shooting 78 grains of vv560 and 168 VLD bergers and it works great. I just want to try the heavier bullets. I will use winchester 215s to light the round and I am using winchester brass.
Also I want a good idea for a starting load for my 280. Looks like max load for a 150 grain bullet is around 60 grains so I would think I should start around 50 grains. I plan to set fire with CCI Br2s and I am using winchester brass.
DoubleG
Also I want a good idea for a starting load for my 280. Looks like max load for a 150 grain bullet is around 60 grains so I would think I should start around 50 grains. I plan to set fire with CCI Br2s and I am using winchester brass.
DoubleG