savage stevens vs a pre accutrigger savage screws

E.Precision

Active Member
Joined
Mar 20, 2008
Messages
33
Location
Renton, Washington
I know the stevens is based on a pre accutrigger. But for a stock, are the screws still the same distance a part, or are the stevens different like the new savage's?

Another question is do the stevens have the same magazine feed as the pre accutrigger, or are the centerfeed like the new savages?
Thanks

Erik
 
I know the stevens is based on a pre accutrigger. But for a stock, are the screws still the same distance a part, or are the stevens different like the new savage's?

Another question is do the stevens have the same magazine feed as the pre accutrigger, or are the centerfeed like the new savages?
Thanks

Erik

Stevens has also gone centerfeed. Stevens will have the same screw spacing as the same feed type Savage.

What I'm trying to say is that the feed type(stagger/center) will dictate the spacing not the brand(Stevens/Savage).
 
Warning! This thread is more than 16 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top